Process Flow Diagram of Pre concentration and Enrichment of Binhai Zirconium Titanium Ore

Binhai zirconium titanium ore is an important mineral resource with extensive application value. The pre concentration process flowchart is very important when mining and utilizing coastal zirconium titanium ore. This article will introduce the process flow chart and specific operating steps of pre concentration and enrichment of Binhai zirconium titanium ore.

1、 Overview of the Process Flow Chart for Pre beneficiation and Enrichment of Binhai Zirconium Titanium Ore

The pre concentration and enrichment process flowchart of the Binhai Zirconium Titanium Mine mainly includes the following steps: grinding, beneficiation, gravity separation, beneficiation, tailings treatment, etc. Among them, grinding is the process of crushing the raw ore into a certain particle size, beneficiation is the process of separating impurities and useful minerals from the ore, gravity separation is the process of further separating the ore after beneficiation, selection is the process of fine separation of the ore after gravity separation, and tailings treatment is the process of treating the treated waste.

II. Specific operating steps

1. Grinding

Grinding is the process of crushing raw ore into a certain particle size. Firstly, the raw ore is sent to a crusher for crushing, and then the crushed ore is sent to a ball mill for grinding. During the grinding process, an appropriate amount of water needs to be added to ensure the fluidity and grinding effect of the ore.

2. Mineral processing

beneficiation is the process of separating impurities and useful minerals from ores. Firstly, the finely ground ore is fed into a screening machine for screening, dividing it into different particle sizes. Then, the screened ore is sent to a gravity separator for gravity separation, separating impurities and useful minerals from the ore.

3. Reselection

Gravity separation is the process of further separating the ore after beneficiation. Firstly, the ore from the gravity separator is fed into the magnetic separator for magnetic separation, separating the magnetic substances from the ore. Then, non magnetic substances are fed into a gravity concentrator for gravity beneficiation, separating the heavy minerals from the ore.

4. Selection

Selection is the process of fine separation of the ore after re selection. Firstly, the ore from the selection machine is fed into the flotation machine for flotation, separating useful minerals from the ore. Then, the flotation ore is sent to the electric separator for electric separation, further separating the useful minerals in the ore.

5. Tailings treatment

Tailings treatment is the process of treating the treated waste. Firstly, the tailings are sent to the tailings pond for sedimentation, allowing the waste to settle to the bottom. Then, the upper layer of clean water is discharged, and the waste at the bottom is sent to the tailings dryer for drying. Finally, the dried waste is buried or recycled.

3、 Summary

The process flow diagram of pre concentration and enrichment of Binhai Zirconium Titanium Mine is a process of crushing, screening, gravity separation, selection, tailings treatment, and other processes to separate useful minerals from the ore. In the specific operation process, it is necessary to pay attention to adding an appropriate amount of water to ensure the fluidity of the ore and the grinding effect. At the same time, tailings also need to be treated to reduce their impact on the environment.

Process Flow Diagram of Pre concentration and Enrichment of Binhai Zirconium Titanium Ore Related products

• 

  Ebo machine

• 

  European version jaw crusher

• 

  Hydraulic cone crusher

• 

  Toothed roller crusher

• 

  Composite crusher

• 

  Heavy hammer crusher

• 

  Construction waste crusher

• 

  Mine crusher