Manufacturer of environmentally friendly spiral chutes

Manufacturer of environmentally friendly spiral chutes

Manufacturer of environmentally friendly spiral chutes, manufacturer of environmentally friendly spiral chutes. 1. Introduction to gravity beneficiation, which is widely used in metal and non-metallic ore beneficiation due to its low environmental pollution and low cost. The spiral chute is one of the gravity sorting machines, with a structural characteristic of a cubic parabolic cross-section. It is used to process finer particle sizes of -0.2mm, and does not require flushing water during the sorting step. Fine, medium, and tailings are segmented at the bottom of the chute. 2、 Operating principle. The average slurry is slowly fed to the rotating groove surface through the feeding chute at the end of the spiral groove head, and sorting is carried out. The tail of the spiral groove is equipped with a valve type product acquisition groove, allowing other equipment to be classified into three categories according to grade along the radial direction. By adjusting the orientation of the valve block to change the selection width of each product, the equipment gathering bucket will densely extract the intercepted multi-directional mineral flow. The cross section of the spiral concentrator and the slope change of the curve are extremely suitable for the selection of fine materials. environmentally friendly spiral chute manufacturer 3. Features and highlights: 1. Heavy duty, large processing output, and the principle of contemporary mineral processing requires creating profits through economies of scale. 2. Fine granulation is used for the treatment of fine particle minerals, especially for the treatment of mineral materials with a particle size of -0.047mm. Originally, the machine could basically ensure the recovery of particles with a particle size of+0.047mm. The working principle of spiral chute in coal washing plant and the manufacturer of environmentally friendly spiral chute 3. With the development of Hydraulics, two-phase flow, mechanical vibration, etc., the glass fiber reinforced plastic chute has progressed from simple use of gravity and flow resistance force to composite application of centrifugal force, equipment vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of applicable minerals is enhanced and the separation of fine and micro particles is achieved, thereby increasing the recovery rate of mineral materials. 4. Based on energy saving, environmental protection and consumption reduction, the land area, space, water and electricity consumption should be small. 5. Simple and flexible operation, stable selection steps, simple structure, and convenient maintenance management. Environmentally friendly spiral chute manufacturer IV. Structure composition. Spiral chutes are all composed of a feeding device, a cross (tripod), a feeding slot, a rotating slot, a selection slot, a gathering bucket, and a slot pillar. 5、 Adopting the fiberglass spiral chute for coal washing in the field, the environmentally friendly spiral chute manufacturer's spiral chute is suitable for processing 0.6-0.03MM and this vein of ore and sand, but it is not conducive to sorting when the mud content is high. It has now been widely used in the processing of iron, tungsten, tin ore, niobium tantalum ore, beach and riverbed placer or gold ore, and so on. Manufacturer of environmentally friendly spiral chutes Manufacturer of environmentally friendly spiral chutes

Manufacturer of environmentally friendly spiral chutes