How to operate the spiral chute

How to operate the spiral chute

How to operate a spiral chute? 1. Describe the spiral chute tool. Due to its low environmental pollution and low cost, gravity separation is widely used in the beneficiation of metal mines and non ferrous metal mines. The fiberglass spiral chute is a type of gravity beneficiation machinery, with a cubic parabolic shape in the cross-section. It is suitable for handling finer particle levels of -0.2 millimeters. During the beneficiation process, there is no need to add water for flushing, and the tail of the chute is divided into sections to obtain fine, medium, and tailings. How to operate a spiral chute? 2. The principle of operation is to slowly feed the mortar onto the surface of the spiral chute through the feeding chute installed at the end of the rotating groove head, and then select it. The tail of the rotating groove is equipped with a valve block type product cutting groove, which divides the sorting equipment into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering hopper enables the selected multi head ore flow to converge and export separately. The cross-section of the spiral chute and the slope of the curve change greatly, which is applied to the selection of fine ore materials. How to operate a spiral chute III. Features. This machine can be used to separate iron ore, Ilmenite, Chromite, pyrite, zircon ore, Rutile, monazite, phosphoethylene, tungsten, cassiterite, tantalum, tantalum niobium and other nonferrous metals, rare metals and nonferrous gold ore bodies with different specific gravity from small materials with Granularity of 0.3-0.02MM. This equipment also has advantages such as stable sorting process, easy operation, wide range of allowable changes in feed density, high enrichment ratio, high recycling rate, small floor area, low water consumption, simple structure, no need for power, large processing output, easy installation, easy operation, low investment, and quick effectiveness. How to operate a spiral chute at , and how to operate a spiral chute. 4. The structure of a fiberglass spiral chute consists of six parts: a feeding homogenizer, a feeding chute, a rotating groove, an equipment acquisition groove, a product gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by connecting the rotating blades is a key component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by bolts. The sorting surface of the rotating groove has a pre made durable and wear-resistant layer. He also has the advantages of lightweight, sturdy, and long-lasting durability in consumer goods. The head of the spiral groove is equipped with a multi tube feeding homogenizer for ore dressing, which is also easy to operate. The ore separator is freely placed on the cross (or tripod) on the support table. The evenly distributed mortar is slowly fed onto the surface of the spiral groove through the feeding groove installed at the beginning of the rotating groove, and the selection is carried out. The bottom of the rotating groove is installed in a valve block type new product cutting groove, and the sorted new products are divided into three categories (or four types) of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that allows the obtained multi head ore flow to be gathered and exported separately. The transverse plane of the spiral chute and the different slopes of the curves are very suitable for the selection of small particle mineral materials. 5、 Applicable. How to operate the spiral chute This machine is suitable for separating iron ore, Ilmenite, chromite, pyrite, zircon sand, Rutile, monazite, phosgenite, tungsten, sand tin, tantalite, tantalum niobium or other colored metals, rare mineral metals or nonferrous metal mineral bodies with different density and specific gravity from fine and small materials with a Granularity of 0.3-0.02MM. How to operate a spiral chute How to operate a spiral chute

How to operate the spiral chute