What is the use of spiral chute size

What is the use of spiral chute size

What is the use of spiral chute size? 1. Equipment description. What is the use of the size of the spiral chute? A gravity sorting machine used for mineral mortar to achieve lightweight and heavy mineral sorting due to the inertial centrifugal force that occurs during spiral motion. 2、 Working principle: Layout of spiral chutes. Equal mineral mortar is slowly fed onto the rotating groove surface through a feeding chute installed at the head of the spiral groove for sorting. The bottom of the spiral groove is equipped with a valve block type product acquisition groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each product, the equipment gathering hopper allows the selected multi head ore flow to be collected and exported separately. The cross section of the spiral concentrator, with a change in the slope of the curve, is extremely suitable for the selection of fine-grained materials. What are the uses of the size of the spiral chute at ? 3. Features: How to operate the spiral chute. The fiberglass chute has attracted special attention among various gravity beneficiation machines due to its low power consumption, simple structure, small footprint, easy operation, stable beneficiation, clear separation, no need for moving parts, convenient maintenance and management, and high output per unit area. The machinery has a relatively wide and stable groove surface, and the mineral mortar exhibits a large area of laminar flow, making it more suitable for processing medium to fine (-4mm) sized ores. We have made spiral chutes with diameters of 400, 600, 900, and 1200 millimeters domestically, Ф The processing capacity of 1200MM four head is about 4-6 T/H. What are the sizes of spiral chutes used for. The fiberglass chute is composed of six parts: a feeding homogenizer, a feeding trough, a rotating trough, an equipment selection trough, a product gathering hopper, or a trough bracket (including a cross or triangular frame). The spiral groove formed by connecting spiral pieces is a key accessory. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue), connected together by screws, and the rotating groove has a pre designed durable wear-resistant layer on the selected surface. It also has the advantages of light weight, durability, and durability in using consumer goods. Above the spiral groove is a multi tube feeding homogenizer that screens ore evenly, making it easy and convenient to operate. The sorting machine is not limited to being placed on the cross (or tripod) of the support table. The uniform mortar is slowly fed onto the spiral groove surface by installing the feeding groove at the head end of the rotating groove for sorting. The tail of the rotating groove is equipped with a valve type new equipment to cut the groove and classify the selected new products into three categories (or four categories) radially according to grade. Change the width of each new device by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that allows the selected multi head ore flows to converge and lead out separately. The cross section and slope of the curve of the spiral concentrator are particularly suitable for the selection of fine-grained ore. Spiral chute with a pitch of 360. 5、 The use of a field spiral concentrator is suitable for processing 0.6-0.03MM and vein ores and minerals, but it is unfavorable for separation when the mud content is high. Currently, it has been widely used for processing iron ore, tungsten, tin ore sand, tantalum niobium, bay and riverside ore and placer gold. What is the use of spiral chute size What is the use of spiral chute size

What is the use of spiral chute size