One weight of spiral chute

Introduction to the Influence of Spiral Chutes on Mica. The gravity separation spiral chute is a combination of the characteristics of spiral chute, spiral chute, shaking table, and centrifuges for mineral processing. After the Ministry of Metallurgical Industry organized relevant scientific research, and the design, universities, mines and other departments carried out appraisal, it was recognized that this kind of mechanical performance is excellent, and the separation goal has been improved. At the same time, it has won the scientific and technological research achievement award of the Ministry of Metallurgical Industry, and has been used in a large number of non-ferrous and Ferrous mines. This machine is suitable for separating iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon, Rutile, monazite, phosphate ore, wolframite, placer tin, tantalum niobium ore, tantalum niobium ore or other non-ferrous metal ores, rare mineral metals or non-metallic minerals with gravity difference from 0.3-0.02 mm fine materials. 2、 Technical principles. The average mineral mortar is slowly fed onto the rotating groove surface through a feeding groove installed at the head of the spiral groove for sorting. The tail of the spiral groove is equipped with a valve type product selection groove, which divides the selection equipment into three categories according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper enables the multi-directional mineral flow to be differentiated and converged. The transverse surface of the fiberglass chute and the slope change of the curve are particularly suitable for the selection of fine particle materials. The weight, characteristics, and advantages of a spiral chute are as follows: 1. It is heavily customized and has a large processing output. Nowadays, the overall requirement for processing mineral materials is to use scale efficiency to establish profits. 2. Fine granulation is used for the treatment of fine and small particle grade mineral materials, especially for particles with a particle size of -0.047mm. Originally, the mechanical system was able to ensure the recovery of a particle size of+0.047mm. 3. With the development of Hydraulics, two-phase flow, mechanical vibration, etc., the spiral concentrator has developed from simply using gravity and water flow resistance force to the level of composite applicable centrifugal force, machine vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of applicable mineral materials or the separation of fine and micro particles can be increased, thereby improving the mineral recovery rate. 4. The basic starting point is to save energy consumption, reduce energy consumption and protect the environment. The area and space occupied should be small, and the water and electricity consumption should be small. 5. The operation is simple and flexible, the selection process is stable, and the structure is simple and easy to repair and manage. Can a spiral chute with a weight of be used? Fourthly, the structure of the spiral chute consists of six parts: a feeding homogenizer, a feeding chute, a rotating chute, a product acquisition chute, an equipment gathering bucket, and a support bracket (including a cross or triangular frame). The spiral groove connected by the rotating disc is a key component. The spiral plate is made of fiberglass (fiber reinforced coal gangue), and a wear-resistant layer is pre made on the sorting surface of the rotating groove through bolts. She has the advantages of lightweight, strong, and durable consumer goods. Above the spiral groove, a multi tube feeding homogenizer is installed to evenly distribute the ore, and the operation is not complicated. The screening machine is not limited to being placed on the cross (or tripod) of the support table. The evenly distributed slurry is slowly fed onto the spiral groove surface through the feeding chute installed at the head of the rotating groove, and sorting is carried out. The tail end of the rotating groove is equipped with a valve block type new equipment to intercept the groove, allowing the sorted new products to be divided into three categories (or four categories) according to grade along the radial direction. Change the selection width of each new equipment by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that gathers and exports various obtained mineral flows. The lateral plane of the spiral concentrator and the slope change of the curve are extremely suitable for the selection of fine-grained materials. With magnetic suction spiral chute, the spiral chute has a weight of 5. Scope of application The spiral concentrator is applicable to the separation of fine grained iron ore, Ilmenite, Chromite, pyrite, placer tin, tantalum niobium ore, placer gold, coal, monazite ore, Rutile ore, zircon sand, rare earth ore or other metal and non-metallic mineral materials with sufficient gravity difference. Spiral chute, one weight Spiral chute, one weight