Laboratory spiral chute complete equipment

Laboratory spiral chute complete equipment

A complete set of equipment for spiral chutes in the laboratory. Introduction: Gravity beneficiation is widely used in the beneficiation of metal and non-ferrous metals due to its small environmental pollution and low cost. The fiberglass spiral chute is a type of gravity separation machinery, characterized by a cubic parabolic shape on the cross-section, suitable for handling finer particle levels of -0.2MM. In the selection process, there is no need to add flushing water, and fine, medium, and tailings are segmented at the tail end of the chute. 2、 Technical principle: The spiral chute mineral separator is freely stacked on a cross (or tripod) on a support table. The uniform slurry is slowly fed to the surface of the spiral groove through the feeding groove installed at the head of the rotating groove, and sorting is carried out. The tail end is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three types (or four types) according to grade along the radial direction. Adjust the position of the valve block to change the selection width of each device. The product gathering bucket is a concentric circular tube that aggregates and leads out the obtained multi head ore flow. The transverse section of the fiberglass chute and the slope change of the curve are particularly applied to the sorting of fine particle materials. Complete set of spiral chute equipment in laboratory 3. Characteristic FRP spiral chute has attracted more attention among many gravity separation machines due to its low power consumption, simple structure, small area occupation, simple operation, stable beneficiation, clear beneficiation, no moving parts, convenient Computerized maintenance management system, large processing capacity per unit area, etc. The machine has a wide and relatively stable groove surface, and the mortar has a large area of laminar flow, which is more suitable for processing ores with medium and fine (-4mm) Granularity. Glass fiber reinforced plastic chutes with diameters of 400, 600, 900, and 1200MM have been manufactured domestically, Ф The production capacity of 1200mm four heads is about 4-6 tons/hour. The complete set of equipment for laboratory spiral chutes is . The structure of the spiral concentrator is composed of a feeding device, a cross (tripod), a feeding chute, a spiral groove, a cutting groove, a gathering bucket, and a groove pillar. 5、 The range of spiral chutes used is suitable for separating fine grained iron, ferrotitanium, ferrochrome, pyrite, tin ore, tantalum niobium, gold ore, coal, monazite ore, Rutile ore, zircon, rare earth ore or other metal and non-metallic mineral materials with sufficient specific gravity difference. Complete set of laboratory spiral chute equipment Complete set of laboratory spiral chute equipment

Laboratory spiral chute complete equipment