Inclined tube spiral chute

Inclined tube spiral chute 1. Equipment introduction: A gravity beneficiation machine used for separating light and heavy minerals through continuous centrifugal force during the rotary spiral movement of mortar. 2、 The usage method is to make the fiberglass chute stand up, align it with the vertical line, fix it in the appropriate position with an iron frame or wood, and send the sand ore to the two feeding ports on the top of the spiral through a slurry pump. The water is added and the mineral slurry concentration is adjusted. The mineral slurry naturally swirls from high to low, and an inertial centrifugal force occurs in the rotating inclined flow rate, which is distinguished by the gravity, particle size, and state of the mineral sand, By utilizing the gravity or centrifugal force of the swirling flow, the ore and sand are separated. The selected ore flows into the concentrate hopper and is piped out, while the tailings flow into the tailings hopper and are moved to the sand pit through a pipeline. Then, they are discharged by a mortar pump, completing the entire beneficiation process. inclined tube spiral chute 3. Characteristics 1. Stable and easy to operate selection steps 2. Allowing different ranges of feed density 3. Very high enrichment ratio and recovery rate 4. Small footprint and water consumption 5. Simple structure without power 6. Large processing capacity 7. Simple and easy to understand installation and operation 8. Small investment and quick effect. Inclined tube spiral chute 4. Composed of fiberglass spiral chute with feed homogenizer The feeding chute, spiral groove, equipment selection groove, product gathering hopper, and groove bracket (including cross or triangular frame) are composed of six parts. The rotating groove connected by spiral blades is a key component. The rotating plate is made of fiberglass (fiber reinforced coal gangue), connected together by screws, and the spiral groove has a pre made wear-resistant layer on the selected surface. She has the advantages of being lightweight, sturdy, and durable consumables that are not easily damaged. Above the rotating groove, there is a multi tube feeding homogenizer for ore separation, which is simple and convenient to control. The sieving mineral containers are freely stacked on the cross (or tripod) of the support table. The evenly distributed mortar is slowly fed onto the surface of the rotating groove through the feeding groove installed at the head of the spiral groove, and sorting is carried out. The tail end of the spiral groove is equipped with a valve block type new equipment to obtain the groove. The selected new products are divided into three categories (or four types) according to grade along the radial direction. Change the cutting width of each new equipment by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the selected multiple ore streams to converge and lead out separately. The slope change of the cross-section and curve of the spiral concentrator is very suitable for the separation of fine particle materials. 5、 Application field: Spiral chutes are used for processing 0.6-0.03mm or vein ores and minerals, but high mud content is unfavorable for sorting. It has now been widely used for processing iron, tungsten, sand tin, tantalum niobium mines, beach or river sand mines, and sand gold, among others. Inclined Pipe Spiral Chute Inclined Pipe Spiral Chute