Assembly of polyurethane spiral chute

Assembly of polyurethane spiral chute

Polyurethane Spiral Chute Assembly 1. Equipment Introduction: A gravity beneficiation machine used for separating light and heavy minerals through continuous centrifugal force during the rotary spiral movement of mortar. 2、 The working principle of the spiral mineral separator is that the mineral separator is freely placed on the cross (or tripod) of the support table. The same mortar is slowly fed onto the spiral groove surface through a feeding chute installed on the rotating groove head for sorting. A valve type equipment is installed at the tail to obtain a slot, allowing the sorted products to be divided into three (or four) categories according to grade along the radial direction. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that distinguishes and converges the intercepted multi-directional mineral flow. The transverse surface of the fiberglass chute and the slope change of the curve are very suitable for selecting fine-grained materials. Assembly of polyurethane spiral chute III. Special spiral chute has attracted special attention in many gravity concentrators due to its low power consumption, simple structure, small floor area, simple operation, stable beneficiation, clear beneficiation, no moving parts, convenient Computerized maintenance management system, large processing capacity per area and other characteristics. The machine has a relatively wide and stable groove surface, and the mineral mortar has a large area of laminar flow, which is more suitable for processing medium and fine (-4mm) Granularity ores. Fiberglass spiral chutes with diameters of 400, 600, 900, and 1200MM have been manufactured domestically, Ф The production of 1200 millimeters of four heads is approximately 4-6 tons per hour. Polyurethane spiral chute assembly 4. Structure composition: The spiral chute is composed of a feeding homogenizer, a cross (tripod), a feeding chute, a spiral groove, a cutting groove, a gathering bucket, and a groove pillar. 5、 Application field The spiral concentrator is suitable for separating fine grained iron ore, Ilmenite, Chromite, pyrite, placer tin ore, tantalum niobium ore, placer gold, coal mine, monazite, Rutile, zircon sand, rare earth ore and other metal and non nonferrous metal minerals with sufficient density and specific gravity difference. Assembly of polyurethane spiral chute Assembly of polyurethane spiral chute

Assembly of polyurethane spiral chute