Plastic beneficiation spiral chute

Plastic beneficiation spiral chute

Plastic beneficiation spiral chutes 1. Overview: Gravity beneficiation spiral chutes combine the characteristics of spiral beneficiation machines, spiral beneficiation machines, shakers, and centrifuges used for beneficiation. They have been evaluated and approved by relevant scientific research, design, universities, or beneficiation plants organized by the Ministry of Metallurgical Industry. They believe that this type of equipment has superior performance, progress in sorting indicators, and have won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry. They are now in the field of non-ferrous metals Ferrous is widely used. This machine is suitable for separating fine materials with a particle size of 0.3-0.02 mm to obtain iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphate rock, tungsten ore, cassiterite, tantalum, niobium ore and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and specific gravity. 2、 The principle of operation is that the spiral concentrator does not limit the placement of the mineral screening device on the cross (or tripod) of the support table. The average mineral mortar is slowly fed onto the spiral groove surface through a feeding groove installed on the rotating groove head, and the selection is carried out. The bottom is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three (or four) types according to grade along the radial direction. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that aggregates and leads out the obtained multi head ore flow. The transverse section of the fiberglass chute and the change in slope of the curve are particularly suitable for the selection of small particle materials. plastic beneficiation spiral chute 3. Features or advantages: 1. Major industrialization and large production capacity. Nowadays, in principle, large-scale processing of ore materials is required to establish efficiency. 2. Fine granulation is required for the treatment of fine grained minerals. Ten thousand ores with a particle size of -0.047mm must be treated. The original equipment can basically guarantee the recovery of+0.047mm Granularity. 3. With the development of Hydraulics, two-phase flow and equipment vibration, spiral concentrators have developed from simple application of gravity and flow resistance to the level of composite application of centrifugal force, mechanical vibration force, magnetic force, etc. By using a composite force field, the enrichment of useful minerals or the separation of fine and micro particles can be increased, thereby improving the ore recovery rate. 4. The basic starting point is to save energy, reduce consumption and protect the environment. The area and space occupied should be small, and the water and electricity consumption should be small. 5. Simple and flexible operation, stable sorting process, simple structure, convenient Computerized maintenance management system. Plastic beneficiation spiral chute 4. Structural composition: The fiberglass spiral chute is composed of a feeding homogenizer, a cross (tripod), a feeding chute, a spiral groove, a receiving groove, a gathering bucket, and a groove pillar. 5、 This machine can be used to separate iron ore, Ilmenite, Chromite, pyrite, zircon sand, Rutile, monazite, phosphorus ethylene, tungsten, tin ore, tantalum ore, tantalum niobium and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and proportion. Plastic beneficiation spiral chute Plastic beneficiation spiral chute

Plastic beneficiation spiral chute