Actual collection of sulfur iron in spiral chute

Actual collection of sulfur iron in spiral chute

The practical application of spiral chute sulfur iron ore is introduced. Gravity separation is widely used in the beneficiation of metal or non-ferrous metal mines due to its low environmental pollution and cost. The spiral beneficiation machine is one of the gravity beneficiation equipment, characterized by a cubic parabola shaped cross-section, suitable for processing finer particle sizes of -0.2 millimeters. In the beneficiation process, there is no need to add flushing water, and the fine, medium, and tailings are segmented at the tail end of the tank. 2、 Working principle: The fiberglass chute sorting machine is not limited to being placed on the cross (or tripod) of the support table. The uniform mortar is slowly fed onto the spiral groove surface through the feeding chute installed at the head end of the rotating groove for sorting. The tail end is equipped with a valve block type product cutting groove, which divides the selected equipment into three categories (or four categories) radially according to grade. Change the acquisition width of each product by adjusting the position of the valve block. The equipment gathering bucket is a concentric circular tube that allows the selected multi head ore flow to converge and export differently. The cross section and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine particle ore materials. The actual collection of sulfur iron in the spiral chute. 3. The characteristic spiral concentrator has attracted more attention in non gravity beneficiation equipment due to its low power consumption, simple structure, small land occupation, simple operation, stable beneficiation, clear ore sorting, no moving parts, easy maintenance and management, strong single area processing ability, and other characteristics. The machine has a relatively wide and stable trough surface, and the slurry has a large laminar flow area, which is more suitable for processing medium and fine (-4MM) Granularity ores. Spiral chutes with diameters of 400, 600, 900, and 1200 millimeters have been produced in China, Ф The production capacity of 1200mm four head is about 4-6 t/h. The paid in amount of sulfur iron in spiral chute is . 4. The chute can be divided into three categories according to the Granularity of the processed mineral materials: (1) coarse size spiral chute, the maximum particle size of ore feeding is more than 2-3mm, and the maximum can be 100-200mm. (2) The sand ore chute is used to handle 2-3MM sized ores. (3) Slurry chute, feeding Granularity is less than 0.074mm. 5、 Scope of application: FRP spiral chute is used to separate fine grained iron ore, ilmenite ore, chromite ore, pyrite ore, sand tin, tantalum niobium ore, placer gold ore, coal mine, monazite, Rutile, zircon ore, rare earth ore or other metal and non-metallic mineral materials with sufficient Density contrast. Actual Collection of Spiral Chute Sulfur Iron @ @ 000 Actual Collection of Spiral Chute Sulfur Iron

Actual collection of sulfur iron in spiral chute