Wear resistant plate spiral chute

Wear resistant plate spiral chute

Wear plate spiral chute 1. Overview The gravity beneficiation spiral chute is a combination of the characteristics of the spiral concentrator, spiral concentrator, shaker, and concentrator centrifuge. It has been appraised by the Ministry of Metallurgical Industry for relevant scientific research, design, universities, concentrators, and other units. It believes that this kind of equipment has superior performance, progress in sorting indicators, and has won the Scientific and Technological Research Achievement Award of the Ministry of Metallurgical Industry. Now it has been widely used in non-ferrous and Ferrous metals. This machine is suitable for separating fine materials with a particle size of 0.3-0.02 mm to obtain iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphate rock, tungsten ore, cassiterite, tantalum, niobium ore and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and specific gravity. 2、 Technical principle: The fiberglass spiral chute separator can be freely placed on a cross (or tripod) on a support table. Equal slurry is slowly fed onto the surface of the rotating groove through the feeding chute installed at the head of the spiral groove, and sorting is carried out. The tail is equipped with a valve type product selection slot, which divides the selected equipment into three (or four) categories according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that allows the obtained multi-directional mineral flow to be densely drawn out. The cross-section of the spiral chute and the slope change of the curve are particularly suitable for the separation of fine particle materials. wear-resistant plate spiral chute 3. Characteristics and advantages 1. Large scale, strong handling capacity, and the overall demand for processing mineral materials today is to build revenue based on scale effect. 2. Fine granulation is used for the treatment of fine and small particle grade mineral materials, especially for minerals with a particle size of -0.047mm. The original machinery can generally ensure the recovery of+0.047mm particle size. 3. With the development of Hydraulics, two-phase flow, machine vibration, etc., GRP spiral chutes have developed from simple use of gravity and water blocking force to the level of composite use of centrifugal force, equipment vibration force, magnetic separation force, etc. Through the composite force field, the enrichment of useful mineral materials and the separation of fine particles from these fine particles are increased, thereby improving the mineral recovery rate. 4. The basic starting point is to save energy, reduce energy consumption and protect the environment. The land area and space occupied should be small, and the water consumption and power consumption should be small. 5. Convenient and flexible operation, stable selection process, simple structure, and easy maintenance management. Wear plate spiral chute IV. According to the Granularity of ore processed, the chute can be divided into three categories: (1) Coarse grained chute, the maximum Granularity of feeding is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) The ore chute is used to handle 2-3mm sized ore materials. (3) Slurry chute, with a feeding particle size less than 0.074MM. 5、 The application scope of spiral concentrator is to separate fine grained iron ore, Ilmenite, Chromite, pyrite, sand tin ore, tantalum niobium ore, sand gold, coal, monazite ore, Rutile ore, zircon sand, rare earth ore and other metal and nonferrous metal minerals with sufficient density and specific gravity difference. Wear resistant plate spiral chute Wear resistant plate spiral chute

Wear resistant plate spiral chute