Complete set of spiral chute for ore washing

Complete set of spiral chute for ore washing

A complete set of spiral chutes for ore washing. It indicates that the chute separation of minerals includes an inclined flow separation process. The slurry is fed to a inclined chute or slope, and under the push of water flow, the ore particles are loose and layered. The upper layer is so light that the minerals are quickly discharged to the outside of the chute, while the lower part, which is heavier than the main minerals, stagnates in the inner groove or slowly discharges from the lower part. After being obtained, the concentrate and tailings can be obtained. The spiral concentrator is a machine for mining and beneficiation, especially ideal for mineral mining on coasts, riverbanks, sandbanks, and river beds. The product has the characteristics of reasonable structure, simple installation, small footprint, simple operability, stable beneficiation, clear screening of minerals, strong processing capacity, high efficiency, ultra-high enrichment ratio, high recovery rate, and stable operation. There are also advantages such as lightweight, moisture prevention, rust prevention, corrosion prevention, and strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The technical principle is that the slurry is evenly distributed and slowly fed onto the surface of the spiral groove through the feeding groove installed at the head of the rotating groove, and sorting is carried out. The tail end of the rotating groove is equipped with a valve block type equipment to cut the groove, and the sorted products are divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering hopper allows the selected multi-directional mineral flow to be collected and led out differently. The transverse plane of the fiberglass spiral chute has a slope change curve, which is particularly suitable for the separation of small particle materials. A complete set of spiral chutes for ore washing at the rate of . Highlights: 1. Stable, easy to operate, and with a large density range. 2. The production and processing capacity of materials is large, with high enrichment ratio and high recycling rate. 3. It takes up little space, consumes less water, has a simple structure, and does not require power. 4. It is installed in a simple and simple manner, with easy operation, low investment, and fast efficiency. The complete set of ore washing spiral chutes is . The types of chutes can be divided into three categories according to the particle size of the processed ore: (1) Coarse particle spiral chutes, with a maximum particle size of 2-3 millimeters or more for ore feeding, and a maximum of 100-200mm. (2) Mineral sand chute, processing 2-3 mm particle size mineral materials. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 Use This product is suitable for separating iron, ferrotitanium, chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten, tin placer, tantalum niobium ore, niobium and other non-ferrous metal ores, rare ore metals or non-metallic minerals with different specific gravity. Complete set of ore washing spiral chutes Complete set of ore washing spiral chutes

Complete set of spiral chute for ore washing