Spiral chute separation of zirconium ore

Spiral chute separation of zirconium ore

A gravity separation machine used for separating light and heavy minerals through the continuous centrifugal force generated by the spiral movement of mineral mortar. 2、 The technical principle is that the slurry is evenly distributed and slowly fed onto the surface of the spiral groove through the feeding groove installed at the head end of the rotating groove, implementing sorting. The tail of the rotating groove is equipped with a valve block type product acquisition groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper allows the selected multi-directional mineral flow to be distinguished and gathered. The cross-section of the fiberglass chute and the slope change of the curve are particularly suitable for the separation of fine particle materials. Spiral Chute Zirconium Ore Selection III. Characteristics: The spiral concentrator has attracted more attention in multiple gravity ore selection equipment due to its low power consumption, simple structure, small land occupation, simple operation, stable beneficiation, clear separation of ore, no need for moving parts, easy maintenance and management, and large single area output. The machine has a wide and flat groove surface, and the mortar flows in a laminar flow with a huge area. It is more suitable for processing medium to fine (-4mm) sized ores. China has produced fiberglass spiral chutes with diameters of 400, 600, 900, and 1200mm, Ф The processing capacity of 1200MM four head is about 4-6 T/H. Spiral chute selection of zirconium ore 4. Structural composition: The spiral concentrator is composed of six parts: feeding homogenizer, feeding chute, spiral groove, equipment cutting groove, product gathering hopper or groove support (including cross or triangular frame), etc. The main component is the rotating groove connected by the rotating disc. The spiral plate is made of fiberglass (fiber reinforced coal gangue) and is bolted together. The sorting surface of the spiral groove has a pre made wear-resistant layer. She has the advantages of lightweight, sturdy, and durable consumables. A multi tube feeding homogenizer is installed above the rotating groove to evenly sort minerals, making control simple and convenient. The mineral screening device is not limited to being placed on a cross (or tripod) on a supporting table. Uniform mineral mortar is slowly fed to the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and selection is carried out. The tail end of the spiral groove is equipped with a valve block type new equipment to obtain the groove. The sorted new products are divided into three (or four) types of new products along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the intercepted and variable mineral flows to be densely drawn out. The transverse section of the fiberglass chute and the slope change of the curve are extremely suitable for the selection of fine particle materials. 5、 Use This machine is suitable for sorting iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon ore, Rutile, monazite, phosphate ore, tungsten ore, tin, tantalum niobium, niobium with a particle size of 0.3-0.02mm and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and specific gravity. Spiral chute zirconium ore selection Spiral chute zirconium ore selection

Spiral chute separation of zirconium ore