Spiral chute maintenance

Spiral chute maintenance 1. Brief introduction The gravity separation spiral chute is a combination of the characteristics of spiral chute, spiral chute, shaking table, and centrifuges for mineral processing. After the Ministry of Metallurgical Industry organized relevant scientific research, and the design, universities, mines and other departments carried out appraisal, it was recognized that this kind of chute has excellent mechanical performance and progress in sorting goals. At the same time, it has won the scientific and technological research achievement award of the Ministry of Metallurgical Industry. It has been used in a large number of non-ferrous and Ferrous mines. This machine is suitable for separating iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon, Rutile, monazite, phosphate ore, wolframite, placer tin, tantalum niobium ore, tantalum niobium ore or other non-ferrous metal ores, rare mineral metals or non-metallic minerals with gravity difference from 0.3-0.02 mm fine materials. 2、 The production principle is the same: the slurry is slowly fed to the rotating groove surface through the feeding chute at the head end of the spiral groove for sorting. The bottom of the spiral groove is equipped with a valve block type product acquisition groove, and the sorting equipment is divided into three types according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block, and gather the selected multi-directional mineral flow through the equipment gathering hopper. The slope change of the cross-section and curve of the fiberglass chute is very suitable for the selection of fine particle materials. Spiral chute maintenance 3. Features This equipment is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate ore, tungsten ore sand, tin, tantalum niobium ore, tantalum niobium ore or other non-ferrous metal ores, rare ore metals and non-metallic minerals with gravity difference. This machine also has advantages such as stable selection process, easy operation, wide range of allowable changes in feed density, high enrichment, high recovery rate, small footprint, low water consumption, simple structure, no need for power, large processing capacity, easy installation, easy operation, low investment, and quick effectiveness. Spiral chute maintenance 4. The structure of the spiral concentrator consists of a feeding homogenizer, a cross (tripod), a feeding chute, a spiral groove, a cutting groove, a gathering bucket, and a groove pillar. 5、 Application: FRP spiral chute is suitable for separating fine iron, ferrotitanium, ferrochrome, ferrosulfur, sand tin, tantalum niobium, placer gold, coal, monazite, Rutile, zircon sand, rare earth and other metal and nonferrous metal minerals with completely sufficient specific gravity difference. Spiral Chute Maintenance Spiral Chute Maintenance