Jiangxi Mining Spiral Chute Manufacturer

Jiangxi Mining Spiral Chute Manufacturer

Jiangxi Mining Spiral Chute Manufacturer 1. Overview: The beneficiation chute belongs to the slope flow sorting process. The slurry is fed to a inclined chute or inclined surface, and under the push of water, the mineral particle group is loose and layered. The upper layer of minerals is light and quickly discharged from the outside of the chute, while the lower part of minerals with high specific gravity stagnate inside the chute or slowly discharge from the lower part. After being obtained separately, the concentrate and tailings can be obtained. Glass fiber reinforced plastic chutes are equipment for mining and mineral processing, especially ideal for mining sand by the sea, river beds, sand banks, and streams. The equipment has the characteristics of suitable structure, simple installation, small footprint, easy operation, stable beneficiation, clear separation of ore, high production capacity, high efficiency, ultra-high enrichment ratio, high recovery probability, and reliable operation. There are also advantages such as light weight, moisture resistance, rust resistance, corrosion resistance, and strong adaptability to fluctuations in ore feed volume or concentration, particle size, and grade. 2、 Use skills to erect the glass fiber reinforced plastic spiral chute, calibrate the vertical line, use an iron frame or wood to position it at a suitable position, use the sand pump to send the mineral sand to the two feeding ports on the screw head, participate in making up the water, and mobilize the density of mineral mortar. The mineral slurry naturally rotates from high to low, and there is a coherent centrifugal force in the flow speed of the whirling inclined plane. The difference in the specific gravity, Granularity, and shape of the mineral sand can be obtained, By utilizing the gravity of the swirling flow and the centrifugal force, the sand and ore are separated, and the selected ore enters the concentrate hopper and is piped out. The tailings are discharged into the tailings hopper and moved to the sand tank through a pipeline, and then discharged by a sand pump, completing the entire beneficiation process. Manufacturer 3, Characteristics and Highlights of Jiangxi Mining Spiral Chute Factory: 1. Heavy duty, large processing output, and the principle of contemporary ore processing requires creating profits through economies of scale. 2. Fine granulation is used for the treatment of fine particle minerals, especially for the treatment of mineral materials with a particle size of -0.047mm. Originally, the machine could basically ensure the recovery of particles with a particle size of+0.047mm. 3. With the development of Hydraulics, two-phase flow, mechanical vibration, etc., GRP chutes have developed from the simple use of gravity and water blocking force to the composite application of centrifugal force, equipment vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of applicable minerals is enhanced and the separation of fine and micro particles is achieved, thereby increasing the recovery rate of mineral materials. 4. Based on energy saving, environmental protection and consumption reduction, the land area, space, water and electricity consumption should be small. 5. Simple and flexible operation, stable selection steps, simple structure, and convenient maintenance management. Jiangxi Mining Spiral Chute Manufacturer IV. The structure of the spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a rotating chute, a product acquisition chute, an equipment gathering hopper, and a support bracket (including a cross or triangular frame). The spiral groove connected by the rotating disc is a key component. The spiral plate is made of fiberglass (fiber reinforced coal gangue), and a wear-resistant layer is pre made on the sorting surface of the rotating groove through bolts. She has the advantages of lightweight, strong, and durable consumer goods. Above the spiral groove, a multi tube feeding homogenizer is installed to evenly distribute the ore, and the operation is not complicated. The screening machine is not limited to being placed on the cross (or tripod) of the support table. The evenly distributed slurry is slowly fed onto the spiral groove surface through the feeding chute installed at the head of the rotating groove, and sorting is carried out. The tail end of the rotating groove is equipped with a valve block type new equipment to intercept the groove, allowing the sorted new products to be divided into three categories (or four categories) according to grade along the radial direction. Change the selection width of each new equipment by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that gathers and exports various obtained mineral flows. The lateral plane of the spiral concentrator and the slope change of the curve are extremely suitable for the selection of fine-grained materials. 5、 Application field The spiral concentrator is suitable for separating fine grained iron ore, Ilmenite, Chromite, pyrite, placer tin ore, tantalum niobium ore, placer gold, coal mine, monazite, Rutile, zircon sand, rare earth ore and other metal and non nonferrous metal minerals with sufficient density and specific gravity difference. Jiangxi Mining Spiral Chute Manufacturer Jiangxi Mining Spiral Chute Manufacturer

Jiangxi Mining Spiral Chute Manufacturer