Tail throwing of spiral chutes

Tail throwing of spiral chutes

Tailing of spiral chutes: 1. Explanation: The re selection spiral chutes integrate the characteristics of fiberglass spiral chutes, fiberglass spiral chutes, shakers, and centrifugal gold concentrators. After scientific research organized by the Ministry of Metallurgical Industry, design, school, and operation appraisal of this beneficiation enterprise, it is recognized that this equipment has excellent performance, advanced sorting indicators, and has won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry Ferrous mines are widely used. This equipment is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphoethylene, tungsten ore sand, tin placer, tantalite, tantalum niobium ore and other nonferrous metals, rare mineral metals and non nonferrous metal ore objects due to gravity difference. 2、 The method of use is to set up the spiral concentrator, calibrate the vertical line, fix the iron shelf or wood in the proper position, send the sand ore to the two ore feeding ports on the spiral top by the slurry pump, add water, adjust the density of the mineral slurry, the slurry naturally swirls from high to low, generate a single coherent centrifugal force in the flow speed of the rotating slope, and obtain the difference in the specific gravity, Granularity and state of the sand ore, Through the action of gravity and centrifugal force obtained through swirling flow, the sand and ore are separated, and the concentrate is discharged into the beneficiation hopper and connected out through pipelines. The tailings flow into the tailings hopper and are moved to the sand tank through pipelines, and then discharged by a sand pump, completing the entire beneficiation process. Tailing of spiral chute 3. Features 1. The sorting process is stable and easy to operate 2. The feed density allows a wide range of different densities 3. The ultra-high enrichment ratio and high recycling rate 4. The floor area is relatively small and the water consumption is small 5. The structure is simple and does not use power 6. The output is high 7. The installation is simple and easy to operate 8. The tailing of spiral chute is small, fast and effective, Chutes can be divided into three categories: (1) Coarse grained spiral chutes, with a maximum particle size of 2-3mm or more for ore feeding, and a maximum size of 100-200mm. (2) The sand ore chute is used to handle 2-3MM sized ores. (3) Slurry chute, feeding Granularity is less than 0.074mm. 5、 Scope of application: FRP spiral chute is used to separate fine grained iron ore, ilmenite ore, chromite ore, pyrite ore, sand tin, tantalum niobium ore, placer gold ore, coal mine, monazite, Rutile, zircon ore, rare earth ore or other metal and non-metallic mineral materials with sufficient Density contrast. Tail throwing of spiral chute Tail throwing of spiral chute

Tail throwing of spiral chutes