How to operate the spiral chute

How to operate the spiral chute

How to operate a spiral chute: 1. Introduction: The chute selection belongs to the slope flow selection process. Mineral mortar is fed to a partially inclined chute or inclined surface, and with the assistance of water, the mineral particle group becomes loose and layered. The upper layer of light minerals quickly exits the outside of the chute, while the lower layer of heavy minerals stays inside the chute or flows out at low speed from the bottom. After differentiation, the selected ore or tailings are obtained. Spiral chutes are machinery for mining and mineral processing, making them particularly ideal for mining sand deposits in bays, rivers, sandbanks, and streams. The equipment has the characteristics of correct structure, simple installation, small footprint, easy operation, stable beneficiation, clear mineral separation, large processing capacity, high efficiency beneficiation and enrichment ratio, high recovery and utilization rate, and reliable operation. It has the advantages of small weight, moisture prevention, rust prevention, corrosion resistance, and strong adaptability to the fluctuation of feed volume, density, Granularity, and grade. 2、 Set up the spiral concentrator by using the method, calibrate the vertical line, fix the iron frame or wood at a suitable position, send the sand ore to the two ore inlets on the spiral top by the sand pump, add water, and adjust the concentration of the mineral slurry. The mineral slurry naturally swirls from high to low, generating a coherent centrifugal force in the flow rate of the whirling inclined surface, and obtaining the difference in the density, specific gravity, Granularity and shape of the mineral sand, Through the influence of the gravity of the swirling flow and the centrifugal force, the ore and sand are separated. The selected ore flows into the concentrate hopper and is piped out, while the tailings flow into the tailings hopper and are moved to the sand pit through a pipeline. Then, they are discharged by a sand pump, completing the entire beneficiation process. How to operate a spiral chute 3. Features 1. Stable and easy selection process 2. Allowing for a wide range of feed densities 3. Ultra high enrichment ratio and high recycling rate 4. Small footprint and water consumption 5. Simple structure without power 6. High output 7. Easy installation and easy operation 8. How to operate a small and quick effect spiral chute 4. The structure of a fiberglass spiral chute is composed of a feeding device The cross (tripod), feeding chute, spiral groove, acquisition groove, gathering bucket, and groove support are composed. 5、 This machine is suitable for separating iron ore, Ilmenite, chromite, pyrite, zircon sand, Rutile, monazite, phosphate ore, tungsten ore, tin, tantalum ore, niobium ore and other non-ferrous metals, rare mineral metals or non-ferrous metal minerals with different density and specific gravity from small Granularity of 0.3-0.02MM. How to operate a spiral chute How to operate a spiral chute

How to operate the spiral chute