What is the use of spiral chute size

What is the use of spiral chute size

What is the use of the size of a spiral chute? Firstly, introduce the steps of chute sorting minerals that belong to inclined flow sorting. Mineral mortar is provided on a partially inclined chute or inclined surface. With the assistance of water, the mineral particle group is not tightened and layered. The lighter mineral material on the upper part is quickly discharged to the outside of the chute, while the heavier mineral material on the lower part stays in the inner groove or flows out at a slow speed from the lower part. After being obtained separately, concentrate and tailings are obtained. The fiberglass spiral chute is an equipment for mining and beneficiation, making it ideal for mining sand mines in coastal areas, riverbanks, sandbanks, and streams. The product also has the characteristics of reasonable structure, simple installation, less land occupation, simple operability, stable beneficiation, clear screening of ore, large processing output, high efficiency, high beneficiation concentration ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, corrosion prevention, and strong applicability to feed volume, density, Granularity, and grade fluctuation. 2、 Use skills to make the spiral concentrator stand up, align it with the vertical line, use an iron shelf or wood to stabilize it in a suitable position, use the sand pump to transport the ore sand to the two feeding ports on the spiral head, add make-up water, and adjust the concentration of the ore slurry. The mineral slurry naturally swirls from high to low, and an inertial centrifugal force occurs in the flow rate of the swirling inclined surface to obtain the difference in gravity, Granularity and shape of the sand ore, By achieving the efficiency of gravity or centrifugal force through swirling flow, the ore and sand are separated, and the concentrate is discharged into the beneficiation hopper and connected out through pipelines. The tailings flow into the tailings hopper and are connected to the sand pit through pipelines, and then discharged by a mortar pump, completing the entire beneficiation process. What's the use of spiral chute size? 3. Characteristics This product is suitable for sorting iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon ore, Rutile, monazite, phosphate ethylene, tungsten ore, sand tin, tantalum, niobium ore and other nonferrous metals, rare metals and non-metallic ore bodies with density and specific gravity difference of 0.3-0.02MM fine materials. This equipment also has advantages such as stable and easy operation in the selection process, a wide range of allowable changes in feed density, high enrichment ratio, high recovery rate, small footprint, low water consumption, simple structure, no need for power, strong processing ability, easy installation and operation, low investment, and quick effectiveness. What's the use of spiral chute size. (2) Sand ore chute, processing 2-3mm Granularity ores. (3) The slurry spiral chute, with a feeding particle size of less than 0.074mm. 5、 Scope of application: FRP spiral chute is applicable to the separation of fine grained iron, ferrotitanium, ferrochrome, pyrite, tin ore, tantalum niobium ore, placer gold, coal, monazite, Rutile, zircon ore, rare earth ore and other metals and non-ferrous metal minerals with full density ratio difference. What is the use of spiral chute size What is the use of spiral chute size

What is the use of spiral chute size