Spiral chute ll1200 parameter power

Spiral chute ll1200 parameter power

Spiral chute ll1200 parameter power 1. Product overview: A gravity beneficiation equipment that uses the continuous centrifugal force generated by mortar in rotary spiral motion to achieve lightweight and heavy mineral separation. 2、 The mineral mortar with the same working principle is slowly fed onto the surface of the spiral groove through the feeding groove at the beginning of the rotating groove, and then selected for operation. The tail of the rotating groove is equipped with a valve type product acquisition groove, and the sorting equipment is divided into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each product, the equipment gathering hopper enables the selected multi-directional mineral flow to be densely led out. The transverse plane of the fiberglass spiral chute has a change in the slope of the curve, which is extremely suitable for the selection of fine particle materials. Spiral Chute ll1200 Parameter Power III. Characteristics Spiral concentrators have attracted more attention in many gravity separation machines due to their low power consumption, simple structure, small land occupation, simple operation, stable beneficiation, clear mineral separation, no moving parts, convenient maintenance and management, strong processing capacity per unit area, and other characteristics. Machinery with relatively wide or flat groove surfaces and large areas of laminar flow of mortar are more suitable for processing medium to fine (-4MM) sized ores. China has made spiral chutes with diameters of 400, 600, 900, and 1200 millimeters, Ф The production capacity of 1200mm four heads is approximately 4-6 tons per hour. Spiral chute ll1200 parameter power 4. Structural composition: The spiral concentrator is composed of six parts: feed homogenizer, feed chute, rotating groove, product intercepting groove, equipment gathering hopper, and groove support (including cross or triangular frame). The spiral groove formed by connecting the spiral pieces is the main component. The rotating plate is made of fiberglass reinforced coal gangue and connected together through screws. The sorting surface of the rotating groove has a pre made durable wear-resistant layer. It also has the advantages of lightweight, sturdy, durable, and durable consumer goods. The head of the spiral groove is equipped with a multi tube ore feeder to evenly separate minerals, and the control is not complicated. The concentrator is not limited to being placed on a cross (or tripod) on a support table. The evenly distributed mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the beginning of the rotating groove, and sorting is carried out. The tail end of the rotating groove is equipped with a valve type new product acquisition groove. The selected new products are divided into three (or four) types of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the obtained multi-directional mineral flow to be collected and exported separately. The cross section and slope of the spiral chute are extremely suitable for the selection of fine particle materials. 5、 Applicable field: FRP chutes are suitable for separating fine iron ore, ferrotitanium ore, chromite ore, pyrite ore, tin ore, tantalum niobium ore, placer gold ore, coal, monazite ore, Rutile ore, zircon ore, rare earth and other metal and non nonferrous metal minerals with complete density ratio difference. Spiral chute ll1200 parameter power Spiral chute ll1200 parameter power

Spiral chute ll1200 parameter power