Spiral chute control

Spiral Chute Control 1. Overview: Gravity beneficiation spiral chutes summarize the characteristics of gravity beneficiation spiral chutes, gravity beneficiation spiral chutes, shakers, and gold concentrators. After being evaluated and approved by relevant scientific research, design, universities, and beneficiation plants organized by the Ministry of Metallurgy, they are considered to have superior mechanical performance, advanced sorting indicators, and have won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry. They are now in the field of non-ferrous metals Ferrous is used in great quantities. This machine is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphate ethylene, tungsten sand, sand tin, tantalum, tantalum niobium and other nonferrous metals, rare metals and non nonferrous gold mineral bodies with gravity difference from fine materials with Granularity of 0.3-0.02 mm. 2、 The working principle of the spiral mineral separator is that the mineral separator is freely placed on the cross (or tripod) of the support table. The same mortar is slowly fed onto the spiral groove surface through a feeding chute installed on the rotating groove head for sorting. A valve type equipment is installed at the tail to obtain a slot, allowing the sorted products to be divided into three (or four) categories according to grade along the radial direction. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that distinguishes and converges the intercepted multi-directional mineral flow. The transverse surface of the fiberglass chute and the slope change of the curve are very suitable for selecting fine-grained materials. Spiral Chute Control III. Features and Advantages 1. Heavy-duty, high production capacity. In principle, contemporary mineral processing requires the creation of benefits through economies of scale. 2. Fine granulation, the treatment of fine and micro particle grade mineral aggregate is the treatment of minerals with a particle size of -0.047MM. The original equipment can basically ensure the recovery of+0.047mm Granularity. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., GRP spiral chute has developed from simple application of gravity and water blocking force to composite application of centrifugal force, equipment vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of suitable mineral materials and the separation of small or fine particles can be increased, thereby improving the mineral recovery rate. 4. With energy saving and environmental protection as the fundamental starting point, the land area and space occupied should be small, and the water and electricity consumption should be small. 5. Convenient and flexible operation, stable sorting steps, simple structure, and convenient Computerized maintenance management system. The spiral chute controls . 4. According to the Granularity of the processed ore materials, the chute can be divided into three types: (1) coarse size chute, the maximum particle size of the feeding material is more than 2-3mm, and the maximum can be 100-200mm. (2) The ore chute handles 2-3mm sized ore. (3) Slime chute, feeding Granularity is less than 0.074MM. 5、 The use of a field spiral concentrator is suitable for processing 0.6-0.03MM and vein ores and minerals, but it is unfavorable for separation when the mud content is high. Currently, it has been widely used for processing iron ore, tungsten, tin ore sand, tantalum niobium, bay and riverside ore and placer gold. Spiral chute control Spiral chute control