Spiral Chutes and Jigs

Spiral chutes and jigs 1. Introduction: Gravity separation spiral chutes integrate the characteristics of gravity beneficiation spiral chutes, spiral beneficiation machines, shakers, and centrifugal gold concentrators. They have been evaluated and approved by relevant scientific research, design, universities, or beneficiation enterprises organized by the Ministry of Metallurgical Industry, and are considered to have superior mechanical performance and advanced sorting indicators. They have also won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry. They are now in the field of non-ferrous metals Ferrous is widely used. This machine is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphate rock, tungsten sand, sand tin, tantalum niobium ore, niobium and other non-ferrous metals, rare metals and non colored metal minerals with different specific gravity from fine materials with a Granularity of 0.3-0.02 mm. 2、 Technical principle: The fiberglass spiral chute mineral separator is not limited to stacking on the cross (or tripod) of the support table. The average mineral mortar is slowly fed onto the spiral groove surface through a feeding groove installed at the end of the rotating groove head for sorting. The tail is equipped with a valve type product selection slot, which divides the selection equipment into three types (or four types) according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that allows the obtained multi head ore flow to gather and lead out. The cross section of the spiral chute is particularly suitable for the selection of fine ore particles due to changes in the slope of the curve. Spiral Chutes and Jigs 3. Special FRP chutes are particularly concerned in many gravity beneficiation equipment because of their low power consumption, simple structure, small area occupied, simple operation, stable beneficiation, clear screening minerals, no need for moving parts, easy maintenance and management, and large production capacity per unit area. The machinery has a relatively wide and stable groove surface, and the area where mortar flows in a laminar flow is larger, making it more suitable for processing medium to fine (-4MM) sized ores. We have produced spiral concentrators with diameters of 400, 600, 900, and 1200 millimeters domestically, Ф The output of 1200mm four heads is approximately 4-6 tons per hour. Spiral chute and jig 4. The structure of the fiberglass chute consists of six parts: a feeding distributor, a feeding chute, a rotating chute, an equipment intercepting chute, a product gathering hopper, and a groove support (including a cross or triangular frame). The spiral groove formed by the connection of rotating discs is a key component. The spiral plate is made of fiberglass (fiberglass reinforced with coal gangue) and connected together by bolts. The sorting surface of the rotating groove has a pre made wear-resistant layer. It has the advantages of lightweight, solid, and durable consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer to divide ore evenly, making it easy to operate. The mineral sorting machine does not need to be placed on a cross (or tripod) on a support table with restricted stacking. The evenly divided slurry is slowly fed onto the surface of the spiral groove through the feeding chute installed on the rotating groove head, and sorting is carried out. The tail of the rotating groove is installed in a valve block type new product acquisition groove, and the new equipment will be sorted radially into three categories (or four types) of new products according to grade. Change the selection width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the intercepted and variable mineral flows to be separated and led out densely. The cross section of the spiral concentrator and the slope change of the curve are particularly suitable for the separation of fine particle materials. 5、 This machine is suitable for separating fine materials with Granularity of 0.3-0.02mm to get iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten sand, placer tin ore, tantalum niobium, niobium ore or other non-ferrous metal ores, rare metals and non-ferrous metal minerals with different density and specific gravity. Spiral Chute and Jig Spiral Chute and Jig