Layout of spiral chutes

The layout of spiral chutes: 1. Description: Spiral chutes combine the characteristics of fiberglass spiral chutes, gravity spiral chutes, shakers, and centrifugal concentrators. After relevant scientific research organized by the Ministry of Metallurgy, design, university, and other departments of this mining plant have identified and passed the evaluation. It is believed that this type of equipment has superior performance and advanced sorting goals. At the same time, it has won the Science and Technology Research Achievement Award from the Ministry of Metallurgy Industry. It has now been awarded the Nonferrous Metals Many Ferrous mines use it. This machine is suitable for sorting iron ore, Ilmenite, Chromite, pyrite, zircon sand, Rutile ore, monazite ore, phosphorus ethylene, tungsten, tin ore, tantalum, niobium ore and other non-ferrous metal, rare metal and nonferrous metal ore bodies with specific gravity difference of 0.3-0.02 mm fine materials. 2、 Working principle: The fiberglass chute separator is freely placed on the cross (or tripod) of the support table. Equal mortar is slowly fed onto the surface of the rotating groove through the feeding chute installed at the end of the spiral groove head, and sorting is carried out. The tail end is equipped with a valve block type product acquisition tank, which divides the selected equipment into three types (or four types) according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that allows the selected variable ore flows to converge and export separately. The transverse plane of the fiberglass spiral chute has different slopes, which is very suitable for the separation of fine ore particles. Layout of spiral chute 3. Characteristics or advantages 1. It is heavy and has strong processing capacity. Today's mineral aggregate processing is objectively conditional on using large scale to create revenue. 2. Fine granulation: for the treatment of fine and micro particle minerals, especially the treatment of ore materials with Granularity of -0.047MM, the original equipment can basically ensure the recovery of+0.047mm particle size. 3. With the development of Hydraulics, two-phase flow and machine vibration, the spiral concentrator has developed from a simple use of gravity and water resistance to a composite application of centrifugal force, equipment vibration force, magnetic separation force, etc. By using a composite force field, more useful minerals are enriched and the separation of fine particles from these fine particles increases the ore recovery rate. 4. Based on energy saving, environmental protection and consumption reduction, the area and space occupied should be small, and the water and electricity consumption should be small. 5. The operation is simple and flexible, the sorting process is stable, the structure is simple and simple, and it is convenient for maintenance management. The layout of the spiral chute is 4. The structural composition of the fiberglass chute is composed of six parts: a feeding homogenizer, a feeding groove, a rotating groove, a product cutting groove, an equipment gathering hopper or a groove bracket (including a cross or triangular frame), and so on. The spiral groove connected by the spiral plate is the main component. The rotating plate is made of fiberglass (fiber reinforced coal gangue), which is connected together through screws. The selected surface of the rotating groove has a predetermined wear-resistant layer. It also has the advantages of lightweight, sturdy, and durable consumer goods. Above the spiral groove, there is a multi tube feeding homogenizer for ore dressing and averaging, with simple control. The mineral screening device is freely placed on a cross (or tripod) on a support table. The evenly distributed mortar is slowly fed to the rotating groove surface by installing it on the feeding groove at the end of the spiral groove head, and sorting is carried out. The tail end of the spiral groove is installed in a valve block type new product acquisition groove, and the selected new products are divided into three categories (or four categories) of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the intercepted variable mineral flows to be gathered and exported separately. The cross section and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine ore materials. 5、 This machine is used to separate 0.3-0.02mm fine materials to obtain iron, ferrotitanium, ferrochrome, ferrosulfur, zircon ore, Rutile ore, monazite ore, phosphorus, tungsten sand, tin ore, tantalum niobium, niobium ore and other non-ferrous metal ores, rare mineral metals and non gold minerals with gravity difference. Layout of Spiral Chutes Layout of Spiral Chutes