Safety Operating Regulations for Rough Selection Spiral Chutes

Safety Operating Regulations for Rough Selection Spiral Chutes

Safety Operation Regulations for Rough Selection Spiral Chute 1. Product Introduction: A gravity separation equipment that uses the inertial centrifugal force generated by mortar in spiral motion to achieve the separation of light and heavy minerals. 2、 Technical principle: The fiberglass spiral chute mineral separator is not limited to stacking on the cross (or tripod) of the support table. The average mineral mortar is slowly fed onto the spiral groove surface through a feeding groove installed at the end of the rotating groove head for sorting. The tail is equipped with a valve type product selection slot, which divides the selection equipment into three types (or four types) according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that allows the obtained multi head ore flow to gather and lead out. The cross section of the spiral chute is particularly suitable for the selection of fine ore particles due to changes in the slope of the curve. Safety Operation Regulations for Rough Selection Spiral Chutes III. Characteristics and Advantages 1. Ultra large-scale, large processing capacity, and modern mineral processing objectively require scale to create benefits. 2. Fine granulation: for the treatment of fine minerals, especially for the treatment of ores with a particle size of -0.047mm, the original machine can generally ensure the recovery of+0.047mm Granularity. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., GRP chutes have developed from simple use of gravity and water blocking force to composite use of centrifugal force, mechanical vibration force, magnetic separation force, etc. Through a composite force field, the enrichment of applicable minerals and the separation of fine particles from these fine particles are enhanced, thereby improving the recovery rate of ore materials. 4. The basic starting point is to save energy, reduce energy consumption and protect the environment. The area and space occupied should be small, and the water and electricity consumption should be small. 5. Simple and flexible operation, stable sorting steps, simple structure, convenient for Computerized maintenance management system. Rough Selection Spiral Chute Safety Operation Regulations 4. Structural Composition: The fiberglass chute is composed of six parts: a feeding distributor, a feeding chute, a rotating chute, an equipment intercepting chute, a product gathering hopper, and a groove support (including a cross or triangular frame). The spiral groove formed by the connection of spiral plates is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and is bolted together. The selected surface of the rotating groove has a pre designed durable wear-resistant layer. It has the advantages of being lightweight, sturdy, durable, and not easily damaged consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer to divide ore evenly, making it easy to operate. The concentrator is not limited to being placed on the cross (or tripod) of the support table. The evenly divided mineral mortar is slowly fed onto the spiral groove surface through the feeding chute at the head of the rotating groove for sorting. The tail of the rotating groove is installed in a valve type new product selection groove, and the selected new products are divided into three types (or four types) of new equipment along the radial direction according to grade. Change the width of each new product by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that allows the intercepted multi-directional mineral flow to converge and lead out. The cross section of the spiral chute and the different slopes of the curves are very suitable for sorting fine particle materials. 5、 Scope of application: FRP spiral chute is applicable to the separation of fine grained iron, ferrotitanium, ferrochrome, pyrite, tin ore, tantalum niobium ore, placer gold, coal, monazite, Rutile, zircon ore, rare earth ore and other metals and non-ferrous metal minerals with full density ratio difference. Safety Operating Regulations for Rough Selection Spiral Chutes Safety Operating Regulations for Rough Selection Spiral Chutes

Safety Operating Regulations for Rough Selection Spiral Chutes