Eddy current separator

Eddy current separator is a reasonable method for rare metal recycling and utilization. The eddy current separator has the advantages of high-quality sorting effect, strong adaptability, reliable mechanical system, light construction quality, strong repulsive force (adjustable), high sorting efficiency and large output. It can make some rare metals extracted from Electronic waste, which is the key to separating nonferrous metal materials such as copper and aluminum from compound materials in the production line of Electronic waste recycling and utilization, and can also be used in the ecological environment protection industry, Especially in the field of non ferrous metal material reconstruction. Principle of eddy current separator: When Electronic waste leftovers with non-magnetic conductor metal materials (such as lead, copper, zinc and other chemicals) change according to an alternating electromagnetic field at a certain rate, the non-magnetic conductor gold filings will cause magnetic induction vortex. Because the flow of raw materials has a relative velocity with the electromagnetic field, it has a driving force on the copper sheets and blocks that cause vortices. By applying this basic principle, some rare metals can be extracted from the compound stream. The driving force that works on metal materials lies in the specifications, appearance, and uneven level of copper blocks. The orientation of the separated driving force is 90 degrees Celsius with respect to the magnetic field force and the orientation of the raw material flow;. The eddy current separator is key to recycling and utilizing non-ferrous metal materials from industrial production and household waste. Typical solutions include: waste copper materials (aluminum), wires and cables, metal aluminum, vehicle waste, non-ferrous metal material slag, printed circuit board slag, non-ferrous metal material broken glass, electronic device waste, non-metallic material (al/cu/Pb/Zn) compounds, copper casting (aluminum) sand, and aluminum slag. 3. Characteristics of the eddy current sorting machine: -1. The adjustment of the waste sorting machine equipment is convenient and simple in actual operation. The adjustment equipment for the motor rotor part is simple and clear, and the actual operation is labor-saving. This shows the visualization of the motor rotor part. -2. The eddy current sorting machine has complete and effective safety prevention equipment, and there are various safety devices in the design scheme. When the machine equipment is found to be abnormal, an alarm system will be immediately sent out to avoid damage to the machine equipment, The first application in the field-- 3. The separation effect of raw materials is very good, and raw materials with small Degree distribution can be separated-- 4. The vortex separator can sort raw materials with different particle size distribution according to different directions of the motor rotor. The adjustment equipment for the rotor part of the vortex motor is simple and clear, and practical operation is effortless. This shows the visualization of the rotor part of the motor. 2. The Eddy current metal separator has complete and effective safety protection equipment. The design scheme has a variety of safety devices, which will send out an alarm system immediately when the machine equipment is found abnormal, so as to avoid damage to the machine equipment. It is the first one in the field to use it. 3. The separation effect of raw materials is very good, and raw materials with small Degree distribution can be separated. 4. The raw materials with different particle size distribution can be sorted according to different directions of the motor rotor 5. The total width of the tray of the Eddy current metal separator can be selected from 300mm to 2000Mm