Coal washing spiral chute manufacturer

Coal washing spiral chute manufacturer

Coal washing spiral chute manufacturer 1 introduces that the chute separation of minerals belongs to the inclined flow separation process. The mortar is provided with some inclined grooves or inclined surfaces. Under the push of water flow, the mineral particle group is loose and layered. The lighter minerals in the upper layer quickly discharge out of the groove, while the heavy minerals in the lower layer are retained inside the groove or discharged slowly from the lower part. After being collected separately, the concentrate and tailings can be obtained. The fiberglass spiral chute is a machine for mining and beneficiation, especially ideal for mining sand in bays, river beds, sandbanks, and streams. The equipment has reasonable structure, simple installation, small footprint, easy operation, stable beneficiation, clear mineral separation, large processing capacity, high efficiency, high beneficiation enrichment ratio, high recovery probability, and reliable operation. There are also advantages such as light weight, moisture resistance, rust prevention, corrosion resistance, and strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade., 2、 The mineral mortar with equal production principles is slowly fed onto the surface of the spiral groove through the feeding groove installed at the head end of the rotating groove for sorting. The bottom of the rotating groove is equipped with a valve block type product cutting groove, allowing the selected equipment to be divided into three categories according to grade along the radial direction. Change the selection width of each product by adjusting the position of the valve block, and the equipment gathering bucket will gather and export the obtained variable mineral flow separately. The transverse plane of the fiberglass spiral chute and the change in slope of the curve are particularly applicable for the sorting of fine particle materials. Manufacturer 3: Features of the Coal Washing Spiral Chute. This equipment is used to separate iron ore, ilmenite, chromite, pyrite, zircon, Rutile, monazite, phosgenite, tungsten, tin placer, tantalite, niobium ore of 0.3-0.02mm fine material, and to obtain other non-ferrous metal ores, rare mineral metals and non-metallic minerals with gravity difference. This machine also has advantages such as stable sorting process, easy operation, wide range of feeding density, high enrichment ratio, high recovery rate, small area occupation, small water consumption, simple structure, no need for power, large processing capacity, easy installation, simple operation, low investment, and quick effectiveness. The coal washing spiral chute manufacturer IV. The chute can be divided into three types according to the Granularity of the processed ore materials: (1) Coarse size chute. The maximum Granularity of the feed is more than 2-3mm, and the maximum can reach 100-200mm. (2) Mineral sand chute, processing 2-3MM particle grade mineral materials. (3) Slurry chute, with a feeding particle size of less than 0.074mm. 5、 In the application field, the spiral concentrator of the coal washing spiral chute manufacturer is applicable to the separation of fine grained iron ore, Ilmenite, Chromite, pyrite, placer tin ore, tantalum niobium ore, placer gold, coal mine, monazite, Rutile, zircon sand, rare earth ore and other metal and nonferrous metal minerals with sufficient density and specific gravity difference. Coal washing spiral chute manufacturer Coal washing spiral chute manufacturer

Coal washing spiral chute manufacturer