Spiral chute for coke storage

Coke storage spiral chute 1. Product introduction. A gravity separation equipment that uses the inertial centrifugal force generated by mortar in spiral motion to achieve the separation of light and heavy minerals. Manufacturer of environmentally friendly spiral chutes, coke storage spiral chutes II. Technical principles: Fiberglass spiral chutes for mineral sorting are not limited to being stacked on crosses (or tripods) on support tables. The average mineral mortar is slowly fed onto the spiral groove surface through a feeding groove installed at the end of the rotating groove head for sorting. The tail is equipped with a valve type product selection slot, which divides the selection equipment into three types (or four types) according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that allows the obtained multi head ore flow to gather and lead out. The cross section of the spiral chute is particularly suitable for the selection of fine ore particles due to changes in the slope of the curve. Coke storage spiral chute 3. Characteristics 1. Stable sorting process and simple control 2. Large allowable range of feed density 3. Ultra high enrichment ratio and high recovery rate 4. Small area occupied and small water consumption 5. Simple structure, no power required. Coke storage spiral chute 6. Strong processing capacity 7. Easy to understand installation and easy to operate 8. Low investment and quick effect coke storage spiral chute 4. Structure composition spiral quartz chute production video. The spiral chute is composed of six parts, including a feeding homogenizer, a feeding chute, a rotating chute, an equipment selection chute, a product gathering hopper, and a support bracket (including a cross or triangular frame). The spiral groove formed by connecting rotating discs is a key accessory. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue), and a wear-resistant layer is pre made on the sorting surface of the rotating groove through bolts. It also has the advantages of lightweight, sturdy, and long-lasting consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer for ore dressing, which is easy to operate. The mineral sorting device is freely placed on the cross (or tripod) of the support table. The evenly divided mineral mortar is slowly fed onto the spiral groove surface through the feeding groove installed at the beginning of the rotating groove for selection. The bottom of the rotating groove is equipped with a valve block type new product acquisition groove, which allows the sorted new products to be divided into three categories (or four categories) of new equipment along the radial direction according to grade. Change the cutting width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that gathers and exports the selected variable mineral flows. The cross section and slope of the curve of the fiberglass chute are particularly suitable for the selection of fine particle materials. Coke storage spiral chute 5. Application range: Fiberglass reinforced plastic spiral chute is suitable for processing 0.6-0.03MM and this vein of ore and minerals, but it is unfavorable for sorting when the mud content is high. Nowadays, it is widely used for processing iron ore, tungsten, tin ore sand, niobium tantalum ore, coastal and riverside placer mines, and sand gold mines. Coke storage spiral chute Coke storage spiral chute