The Effect of Spiral Chutes on Yield

The Effect of Spiral Chutes on Yield

Introduction to the impact of spiral chutes on yield. The impact of spiral chutes on production rate. Spiral chutes combine the characteristics of spiral chutes, fiberglass spiral chutes, shakers, and centrifugal gold concentrators. After scientific research organized by the Ministry of Metallurgy, operation and appraisal by departments such as design, universities, and concentrators, they are recognized as having excellent performance, advanced sorting objectives, and have won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry. They have been widely used in non-ferrous and black mining metals. This machine can be used to separate iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosgenite, wolframite, placer tin, tantalite, tantalum niobium ore or other nonferrous metals, rare mineral metals and nonferrous metal minerals with different density and specific gravity. 2、 Technical principles. The same slurry is slowly fed onto the surface of the spiral groove through the feeding groove installed at the head of the rotating groove for sorting. The tail end of the rotating groove is equipped with a valve block type equipment to select the groove, allowing the sorted products to be divided into three categories according to grade along the radial direction. By adjusting the position of the valve block to obtain the width of each device, the product gathering hopper will differentiate and densely extract the intercepted multi-directional mineral flow. The cross-section of the spiral chute and the slope change of the curve are particularly suitable for the separation of fine particle materials. The impact of spiral chute on productivity. 3. The special FRP spiral chute has attracted special attention in many gravity separation machines because of its low energy consumption, simple structure, small floor area, simple operation, stable beneficiation, clear screening minerals, no moving accessories, convenient Computerized maintenance management system, strong handling capacity per unit area and other characteristics. The equipment has a wide and gentle trough surface, and the slurry flows in a large area in laminar flow, which is more suitable for processing medium and fine (-4mm) Granularity ores. China has made fiberglass chutes with diameters of 400, 600, 900, and 1200MM, Ф The output of 1200mm four heads is approximately 4-6 tons per hour. The Influence of Spiral Chute on Production Rate: 4. Experimental Principle of Structural Composition of Spiral Chute. The fiberglass chute is composed of six parts: a feeding homogenizer, a feeding chute, a rotating chute, a product intercepting chute, an equipment gathering hopper, or a groove support (including a cross or triangular frame). The spiral groove connected by the spiral plate is the main component. The rotating plate is made of fiberglass (fiber reinforced coal gangue), which is connected together through screws. The selected surface of the rotating groove has a predetermined wear-resistant layer. It also has the advantages of lightweight, sturdy, and durable consumer goods. Above the spiral groove, there is a multi tube feeding homogenizer for ore dressing and averaging, with simple control. The mineral screening device is freely placed on a cross (or tripod) on a support table. The evenly distributed mortar is slowly fed to the rotating groove surface by installing it on the feeding groove at the end of the spiral groove head, and sorting is carried out. The tail end of the spiral groove is installed in a valve block type new product acquisition groove, and the selected new products are divided into three categories (or four categories) of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the intercepted variable mineral flows to be gathered and exported separately. The cross section and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine ore materials. 5、 Utilization scope. Spiral concentrators are suitable for processing 0.6-0.03mm or vein ores and minerals, but high mud content is unfavorable for separation. Nowadays, it is widely used for processing iron ore, tungsten, tin, tantalum niobium ore, bay or riverbank ore sand, and gold ore. The Influence of Spiral Chute on Yield The Influence of Spiral Chute on Yield

The Effect of Spiral Chutes on Yield