Spiral chute with magnetic suction

Spiral chute with magnetic suction

Magnetic suction spiral chute 1. Equipment description. A gravity beneficiation machine that utilizes the continuous centrifugal force generated by mortar in rotary spiral motion to achieve lightweight and significant mineral separation. 2、 The production principle is that the slurry is evenly distributed and slowly fed to the spiral groove surface through the feeding groove installed at the head of the rotating groove, and sorting is carried out. The tail end of the spiral groove is equipped with a valve block type product cutting groove, and the selected equipment is divided into three types radially according to grade. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering bucket allows the selected variable ore flow to be separately gathered and exported. The transverse plane of the fiberglass spiral chute has different slopes, which is particularly suitable for the selection of small particle mineral materials. with magnetic suction spiral chute III. Advantages and characteristics: 1. High efficiency, high recovery rate, and precise ore separation; 2. No power required; 3. Lightweight, rust resistant, durable, wear-resistant, and corrosion-resistant; Low cost and long application life; Strong applicability for fluctuations in ore feed volume, concentration, particle size, and grade. The friction force on the surface of 6 diamond sand with magnetic suction spiral chute makes the beneficiation effect better than other plastic surfaces. 4. Structure composition: The fiberglass reinforced plastic chute with magnetic suction spiral chute is composed of six parts: a feeding homogenizer, a feeding groove, a rotating groove, an equipment acquisition groove, a product gathering bucket, or a groove bracket (including a cross or triangular frame). The spiral groove formed by connecting spiral pieces is the main component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue), which is connected together through screws. The selected surface of the rotating groove has a pre designed durable anti wear layer. It also has the advantages of lightweight, sturdy, and long-lasting consumer goods. The head of the spiral groove is equipped with a multi tube feeding homogenizer for screening ore, which is simple to operate. The mineral separator does not need to be restricted to placing on a cross (or tripod) on a support table. The evenly distributed slurry is slowly fed onto the spiral groove surface through a feeding chute installed at the head end of the rotating groove, and sorting is carried out. The bottom of the rotating groove is installed in a valve block type new product cutting groove, and the selected new equipment is divided into three (or four) types of new products according to grade along the radial direction. Change the width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric annular tube that allows the selected variable ore flows to be densely exported. The transverse surface of the fiberglass spiral chute and the slope of the curve change, which is particularly suitable for the separation of small particle mineral materials. 5、 Scope of use: Spiral chute desulfurization. Spiral chutes are suitable for handling 0.6-0.03MM and this vein and sand ore, but high mud content is unfavorable for sorting. Nowadays, it has been widely used for processing iron ore, tungsten, tin ore, tantalum and niobium, beach and riverside mineral sand and sand gold. Spiral chute with magnetic attraction Spiral chute with magnetic attraction

Spiral chute with magnetic suction