Layout of spiral chutes

Layout of Spiral Chute 1. Equipment Introduction. The layout of a spiral chute is a gravity beneficiation machine used for separating light and heavy minerals through the coherent centrifugal force that occurs during the rotary spiral movement of mortar. 2、 Operating principle. The layout of the spiral chute is equal, and the mineral mortar is slowly fed onto the surface of the rotating groove by installing the feeding chute at the end of the spiral groove head, and selection is carried out. The tail of the spiral groove is equipped with a valve block type equipment to select the groove, and the sorted products are divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each equipment, the product gathering hopper allows the obtained multi head ore flow to be collected and exported separately. The cross section and slope of the curve of the fiberglass chute are very suitable for the sorting of fine particle materials. Layout of spiral chute III. Features: This machine can be used to separate iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phenanthrene, tungsten, tin placer, tantalum, tantalum and niobium from other nonferrous metals, rare metals and nonferrous metals with different specific gravity. This equipment also has advantages such as stable sorting process, easy operation, wide range of allowable changes in feed density, high enrichment ratio, high recycling rate, small floor area, low water consumption, simple structure, no need for power, large processing output, easy installation, easy operation, low investment, and quick effectiveness. Layout of spiral chute IV. According to the Granularity of ore processed, the chute can be divided into three categories: (1) Coarse grained chute, the maximum Granularity of feeding is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) The ore chute is used to handle 2-3mm sized ore materials. (3) Slurry chute, feeding ore with a particle size less than 0.074MM. 5、 The application scope of spiral concentrator is to separate fine grained iron ore, Ilmenite, Chromite, pyrite, sand tin ore, tantalum niobium ore, sand gold, coal, monazite ore, Rutile ore, zircon sand, rare earth ore and other metal and nonferrous metal minerals with sufficient density and specific gravity difference. Layout of Spiral Chutes Layout of Spiral Chutes