Rotating spiral chute supplier

Rotating spiral chute supplier

Rotating spiral chute supplier. Supplier 1: Equipment Description: A gravity separation machine used for mineral mortar to achieve lightweight and heavy mineral sorting due to the inertial centrifugal force during spiral motion. 2、 Application methods. Let the fiberglass chute stand up, align it with the vertical line, use an iron frame or wood to stabilize it in a suitable position. The mineral sand is transported by a sand pump to the two feeding ports on the spiral, and added with make-up water to adjust the concentration of the mineral sand slurry. The mineral sand naturally swirls from high to low, and an inertial centrifugal force appears in the swirling slope flow rate. The difference in density, specific gravity, particle size, and morphology of the mineral sand is obtained through the swirling flow, resulting in gravity and the effect of this centrifugal force, Separate the ore and concentrate. The concentrate enters the selection hopper and is piped out. The tailings are discharged into the tailings hopper and transported to the sand pit through a pipeline. Then, they are discharged by a mortar pump, completing the entire beneficiation process. rotary spiral chute supplier III. Special features 1. Stable separation process and simple control 2. Large allowable range of ore feed concentration 3. High enrichment ratio and high recovery probability. Rotary spiral chute supplier 4. Small area occupied and low water consumption 5. Simple construction without power 6. Large processing capacity 7. Simple installation and operation 8 The investment is very small and effective. The supplier of the fast rotating spiral chute, , is composed of six parts: a feeding homogenizer, a feeding chute, a rotating chute, a product intercepting chute, an equipment gathering hopper or a slot bracket (including a cross or triangular frame), etc. The spiral groove connected by the spiral plate is the main component. The rotating plate is made of fiberglass (fiber reinforced coal gangue), which is connected together through screws. The selected surface of the rotating groove has a predetermined wear-resistant layer. It also has the advantages of lightweight, sturdy, and durable consumer goods. Above the spiral groove, there is a multi tube feeding homogenizer for ore dressing and averaging, with simple control. The mineral screening device is freely placed on a cross (or tripod) on a support table. The evenly distributed mortar is slowly fed to the rotating groove surface by installing it on the feeding groove at the end of the spiral groove head, and sorting is carried out. The tail end of the spiral groove is installed in a valve block type new product acquisition groove, and the selected new products are divided into three categories (or four categories) of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the intercepted variable mineral flows to be gathered and exported separately. The cross section and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine ore materials. 5、 Applicable field. The rotary spiral chute supplier glass fiber reinforced plastic chute is suitable for separating fine iron ore, ilmenite ore, chromite ore, pyrite ore, tin ore, tantalum niobium ore, placer gold ore, coal, monazite ore, Rutile ore, zircon ore, rare earth and other gold and nonferrous metal minerals with complete density ratio difference. Rotating Spiral Chute Supplier Rotating Spiral Chute Supplier

Rotating spiral chute supplier