Rutile spiral chute

Rutile spiral chute. 1、 Overview: Chute sorting belongs to the step of slope flow sorting. Mineral mortar is fed to a partially inclined chute or inclined surface. With the assistance of flowing water, the mineral particle group is not tightly fastened and layered. The lighter mineral material on the upper part is quickly discharged out of the groove, while the heavy mineral material on the lower part is stagnant inside the groove or flows out at a low speed from the lower end. After being connected, the selected ore or tailings are obtained. The spiral concentrator is a mechanical device for mining and beneficiation, making it ideal for sand mining in coastal, river, sand beach, and stream beds. The product has the characteristics of appropriate structure, easy installation, small land occupation, easy operation, stable beneficiation, clear mineral separation, high yield, high-efficiency beneficiation, ultra-high enrichment ratio, high recycling rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, corrosion resistance, and strong applicability to fluctuations in feed volume and density, Granularity, and grade. 2、 By using a method, the spiral chute is erected and aligned with the vertical line. An iron frame or wood is used to position it in a suitable position. The sand and ore are pumped by a slurry pump to the two feeding ports above the spiral, where water is added and the density of the mineral slurry is adjusted. The slurry naturally swirls from high to low, generating an inertial centrifugal force in the swirling slope flow velocity. The difference is based on the specific gravity, particle size, and state of the mineral sand, By utilizing the gravity and centrifugal force of the swirling flow, the sand and ore are separated. The selected ore enters the concentrate hopper and is piped out. The tailings are discharged into the tailings hopper and moved to the sand tank through a pipeline, and then discharged by a mortar pump, completing the entire beneficiation process. Rutile ore spiral chute 3. Characteristics and advantages 1. It is heavy and has large output. Nowadays, it is required to treat mineral materials on a large scale to build benefits. 2. Fine granulation is the treatment of fine-grained mineral materials, especially for minerals with a particle size of -0.047mm. The original machinery can basically ensure the recovery of+0.047mm particle size. 3. With the development of Hydraulics, two-phase flow, mechanical vibration and so on, the spiral concentrator has developed from the simple use of gravity and water blocking force to the level of composite centrifugal force, equipment vibration force, magnetic separation force and so on. Through the composite force field, the enrichment of more useful mineral materials and the separation of fine particles from these fine particles increase the mineral recovery rate., Rutile spiral chute 4. Based on energy conservation and environmental protection, it occupies less land area and space, and consumes less water and electricity. 5. Simple and flexible operation, stable sorting process, simple structure and convenient Computerized maintenance management system. Rutile spiral chute IV. According to the Granularity of processed mineral aggregate, the chute can be divided into three categories: (1) Coarse grained chute, the maximum Granularity of feeding is more than 2-3mm, and the maximum can be 100-200mm. (2) Mineral sand chute, handling 2-3 mm sized ore materials. (3) Slurry chute, with a feeding particle size less than 0.074MM. 5、 Application field. The spiral chute spiral concentrator for Rutile ore is suitable for separating fine grained iron ore, Ilmenite, Chromite, pyrite, placer tin ore, tantalum niobium ore, placer gold, coal mine, monazite, Rutile, zircon sand, rare earth ore and other metal and non-ferrous metal minerals with sufficient density and specific gravity difference. Rutile spiral chute Rutile spiral chute