Spiral chute flow rate

Spiral chute flow rate 1 indicates that gravity separation is widely used in the beneficiation of metal or non-ferrous metal mines due to its low environmental pollution and cost. Spiral chute is one of the gravity beneficiation machinery, with a structural feature of a cubic parabolic cross-section, suitable for handling finer particle levels of -0.2mm. During the beneficiation process, there is no need to add water for flushing, and the tail of the chute is divided into sections to select fine, medium, and tailings. Spiral chute flow rate II. Technical principle: The fiberglass spiral chute mineral separator is not limited to being stacked on the cross (or tripod) of the support table. The average mineral mortar is slowly fed onto the spiral groove surface through a feeding groove installed at the end of the rotating groove head for sorting. The tail is equipped with a valve type product selection slot, which divides the selection equipment into three types (or four types) according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that allows the obtained multi head ore flow to gather and lead out. The cross section of the spiral chute is particularly suitable for the selection of fine ore particles due to changes in the slope of the curve. spiral chute flow rate. 3、 Features FRP chutes have attracted more attention among many gravity separation machines due to their low energy consumption, simple structure, small land occupation, simple operation, stable beneficiation, clear mineral separation, no need for moving accessories, convenient Computerized maintenance management system, large processing output per unit size and other characteristics. The machine has a wide and relatively flat groove surface, and the mineral mortar flows in a laminar flow with a large area, making it more suitable for processing medium to fine (-4mm) particle size ores. We in China have made fiberglass spiral chutes with diameters of 400, 600, 900, and 1200 millimeters, Ф The processing capacity of 1200MM four head is about 4-6 T/H. Spiral chute flow rate 4. Structural composition. Spiral chutes are all composed of a feeding device, a cross (tripod), a feeding slot, a rotating slot, a selection slot, a gathering bucket, and a slot pillar. 5、 Purpose: This machine is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate rock, tungsten ore, tin, tantalum niobium, tantalum niobium and other non-ferrous metal ores, rare ore metals and non-metallic minerals with specific gravity difference from 0.3-0.02mm fine materials. Spiral chute flow rate Spiral chute flow rate