What is the use of spiral chutes

What is the use of spiral chutes

What is a spiral chute used for? 1. Explain that the chute sorting of minerals includes an inclined flow sorting process. The slurry is fed to a inclined chute or slope, and under the push of water flow, the ore particles are loose and layered. The upper layer is so light that the minerals are quickly discharged to the outside of the chute, while the lower part is more heavy than the minerals, which stagnate in the inner groove or slowly discharge from the lower part. After being obtained, the concentrate and tailings can be obtained. What is the use of spiral chutes? A spiral concentrator is a machine for mining and beneficiation, especially ideal for mineral mining on coasts, riverbanks, sandbanks, and river beds. The product has the characteristics of reasonable structure, simple installation, small footprint, simple operability, stable beneficiation, clear screening of minerals, strong processing capacity, high efficiency, ultra-high enrichment ratio, high recovery rate, and stable operation. There are also advantages such as lightweight, moisture prevention, rust prevention, corrosion prevention, and strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 Using techniques to establish a fiberglass spiral chute, align it with the vertical line, use an iron frame or wood to fix it in the appropriate direction, and use a sand pump to deliver the mineral sand to the top two feeding ports of the spiral. It is mixed with replenishing water to adjust the concentration of the mineral slurry. The mineral sand slurry naturally swirls from high to low, generating a single inertial centrifugal force in the rotating inclined flow rate, which varies in the specific gravity, particle size, and shape of the mineral sand, Through the influence of the gravity and centrifugal force of the swirling flow, the ore is separated, and the selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings enter the tailings hopper and are connected to the sand tank through pipelines, and then discharged by a mortar pump, completing the entire beneficiation process., What to use for spiral chutes? @ @ 000 What to use for spiral chutes. 3. Advantages and characteristics: 1. Stable, easy to control, and a relatively large concentration range. The daily processing capacity of the spiral chute is. 2. The production and processing yield of materials is large, with high enrichment ratio and high recycling probability. 3. Small footprint, low water consumption, simple construction, and no need for power. 4. Easy to install, easy to operate, minimal investment, and fast recovery of benefits. What is the use of a spiral chute? 4. Structural composition. The spiral concentrator consists of six parts: a feeding homogenizer, a feeding trough, a spiral trough, an equipment selection trough, a product gathering hopper, and a trough bracket (including a cross or triangular frame). The spiral groove formed by connecting rotating discs is a key component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together through screws. The sorting surface of the rotating groove has a pre designed durable wear-resistant layer. It has the advantages of lightweight, sturdy, durable, and durable consumer goods that are not easily damaged. A multi tube feeding homogenizer is installed above the rotating groove to sort minerals equally, making it easy to control. The concentrator does not need to be restricted from being placed on the cross (or tripod) of the support table. The evenly distributed slurry passes through the feeding chute installed at the head end of the spiral groove and slowly feeds onto the rotating groove surface for sorting. The tail of the spiral groove is equipped with a valve type new product acquisition groove, which allows the sorting equipment to be divided into three types (or four types) of new products along the radial direction according to grade. To adjust the orientation of the valve block and change the width of each new product, it is necessary to cut it off. The new equipment gathering bucket is a concentric annular tube that differentially collects and leads selected multi-directional mineral flows. The transverse surface of the fiberglass chute and the slope of the curve change greatly to adapt to the selection of fine-grained materials. Ore leakage due to deformation of the chute surface of the beneficiation spiral chute. V. Application This machine is suitable for sorting iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon ore, Rutile, monazite, phosphate ore, tungsten ore, tin, tantalum niobium, niobium with a particle size of 0.3-0.02mm and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and specific gravity. What is the use of spiral chutes? @ @ 000 What is the use of spiral chutes

What is the use of spiral chutes