Which is the best internal spiral chute

Which is the best internal spiral chute

Which is the best internal spiral chute? Introduction. The sorting of minerals by chute belongs to the process of inclined flow sorting. The mortar is provided with some inclined grooves or inclined surfaces. Under the push of water flow, the mineral particles are loose and layered, and the lighter minerals in the upper layer quickly discharge out of the groove. The heavy minerals in the lower layer are retained inside the groove or discharged slowly from the lower part. After being collected separately, the concentrate and tailings can be obtained. The fiberglass spiral chute is a machine for mining and beneficiation, especially ideal for mining sand in bays, river beds, sandbanks, and streams. The equipment has reasonable structure, simple installation, small footprint, easy operation, stable beneficiation, clear mineral separation, large processing capacity, high efficiency, high beneficiation enrichment ratio, high recovery probability, and reliable operation. There are also advantages such as light weight, moisture resistance, rust prevention, corrosion resistance, and strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The use method is to erect the glass fiber reinforced plastic spiral chute, calibrate the vertical line, fix it in an appropriate position with an iron frame or wood, send the ore sand to the two ore feeding ports above the spiral by the sand pump, mix in the make-up water, and adjust the concentration of the ore slurry. The ore slurry naturally swirls from high to low, generating a single coherent centrifugal force in the flow speed of the revolving inclined surface, so as to obtain the difference in the specific gravity, Granularity and state of the placer, Through the effect of gravity and centrifugal force obtained through swirling flow, the sand ore is separated, and the concentrate flows into the beneficiation hopper and is connected to the sand tank through pipelines. The tail sand is discharged into the tail sand hopper and then connected to the sand tank through pipelines. It is then discharged by a slurry pump, completing the entire beneficiation process. Which company is the best for the spiral chute within ? Highlights and characteristics. Which is the best internal spiral chute? 1. Ultra high efficiency, high recycling rate, and accurate mineral screening; 2. No power required; 3. Lightweight, rust resistant, durable, wear resistant, and corrosion-resistant; 4. Low cost and long service life; 5. Strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade; The friction force formed by the surface of 6 diamond sand makes the beneficiation effect superior to other plastic surfaces. Which company is good for internal spiral chutes. According to the Granularity of the processed mineral aggregate, the chute can be divided into three types: (1) coarse spiral chute, the maximum particle size of the feeding is more than 2-3mm, and the maximum can reach 100-200mm. (2) Sand ore chute, processing 2-3mm Granularity mineral aggregate. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 Application. This product is suitable for separating small materials with Granularity of 0.3-0.02MM to get iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten sand, sand tin, tantalum niobium ore, tantalum niobium ore and other non-ferrous metals, rare mineral metals and non nonferrous metal mineral bodies with gravity difference. Which is the best internal spiral chute? Which is the best internal spiral chute

Which is the best internal spiral chute