Spiral chute measurement

Spiral chute measurement is used by Jiangxi mining spiral chute manufacturers. Spiral chute measurement 1. Description: Gravity beneficiation is widely used in metal and non-metallic ore beneficiation due to its low environmental pollution and cost. The spiral concentrator is one of the gravity separation equipment, with a structural characteristic that the cross-section presents a cubic parabolic state, suitable for processing finer particle sizes of -0.2MM. In the sorting process, there is no need to add flushing water, and fine, medium, and tailings are selected in sections at the tail of the tank. 2、 Technical principle: The manufacturer of coal washing spiral chutes measures the average mineral mortar obtained by the spiral chutes. The mineral mortar is slowly fed onto the rotating groove surface by the feeding groove installed at the head of the spiral chute for sorting. The tail of the spiral groove is equipped with a valve type product selection groove, which divides the selection equipment into three categories according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper enables the multi-directional mineral flow to be differentiated and converged. The transverse surface of the fiberglass chute and the slope change of the curve are particularly suitable for the selection of fine particle materials. Spiral Chute Measurement III. Advantages and Features 1. Stable, easy to operate, and wide concentration range. 2. The processing volume of mineral materials is large, with high enrichment ratio and high recycling rate. 3. It occupies a small area, consumes less water, has a simple structure, and does not require power. 4. Simple installation, easy operation, low investment, and fast returns. Spiral chute measurement IV. According to the Granularity of the processed ore, the chute can be divided into three types: (1) Coarse size chute. The maximum particle size of ore feeding is more than 2-3MM, and the maximum can reach 100-200mm. (2) The ore chute is used to handle 2-3mm sized ore materials. (3) Slurry chute, feeding Granularity is less than 0.074MM. 5、 A phone suitable for selling spiral chutes. This machine is suitable for separating iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten ore, placer tin ore, tantalum niobium, niobium ore and other nonferrous metals, rare mineral metals and nonferrous metal mineral bodies with gravity difference from small materials with Granularity of 0.3-0.02MM. Spiral chute measurement Spiral chute measurement