Telephone selling spiral chutes

Telephone selling spiral chutes

Telephone number for selling spiral chutes: 1. Overview: Mineral processing chutes belong to the slope flow sorting process. The slurry is fed to a inclined chute or inclined surface, and under the push of water, the mineral particle group is loose and layered. The upper layer of minerals is light and quickly discharged from the outside of the chute, while the lower part of minerals with high specific gravity stagnate inside the chute or slowly discharge from the lower part. After being obtained separately, the concentrate and tailings can be obtained. Glass fiber reinforced plastic chutes are equipment for mining and mineral processing, especially ideal for mining sand by the sea, river beds, sand banks, and streams. The equipment has the characteristics of suitable structure, simple installation, small footprint, easy operation, stable beneficiation, clear separation of ore, high production capacity, high efficiency, ultra-high enrichment ratio, high recovery probability, and reliable operation. There are also advantages such as light weight, moisture resistance, rust resistance, corrosion resistance, and strong adaptability to fluctuations in ore feed volume or concentration, particle size, and grade. 2、 Operating principle: The spiral concentrator does not need to be restricted to placing the mineral separator on the cross (or tripod) of the support table. The same slurry is slowly fed to the rotating groove surface through the feeding groove on the spiral groove head, and sorting is carried out. The bottom is equipped with a valve block type product selection slot, which divides the selected equipment into three types (or four types) according to grade along the radial direction. Change the cutting width of each product by adjusting the position of the valve block. The equipment gathering bucket is a concentric circular tube that allows the obtained multi-directional mineral flow to be densely drawn out. The transverse surface of the spiral chute and the slope change of the curve are extremely suitable for the selection of fine particle materials. The third advantage and characteristic of selling spiral chutes is high efficiency, high recovery rate, and correct ore sorting; 2. No power required; 3. Lightweight, rust resistant, durable, wear resistant, and corrosion-resistant; 4. Low operating costs and long service life; 5. Strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade; The friction force caused by the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. The telephone number for selling spiral chutes is . The structure of the fiberglass spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a spiral groove, a product acquisition groove, an equipment gathering hopper or a groove bracket (including a cross or triangular frame), and so on. The main component is the rotating groove connected by the rotating disc. The spiral plate is made of fiberglass reinforced coal gangue, and is bolted together. The selection surface of the spiral groove has a pre made durable and wear-resistant layer. He also has the advantages of light weight, firmness, and durability in consumables. The head of the rotating groove is equipped with a multi tube feeding homogenizer to sort minerals evenly, and the control is simple. The concentrator is freely placed on the cross (or tripod) of the support table. The uniform slurry passes through the feeding trough installed on the spiral groove head and slowly feeds onto the rotating groove surface for sorting. The tail end of the spiral groove is installed in a valve block type new product cutting groove, and the sorting equipment is divided into three types (or four types) of new products along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new equipment gathering bucket is a concentric circular tube that gathers and leads out the obtained multi-directional mineral flow. The cross section of the spiral concentrator and the slope change of the curve are extremely suitable for the separation of fine particle ore materials. 5、 Use This machine is suitable for sorting iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon ore, Rutile, monazite, phosphate ore, tungsten ore, tin, tantalum niobium, niobium with a particle size of 0.3-0.02mm and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and specific gravity. Telephone for selling spiral chutes Telephone for selling spiral chutes

Telephone selling spiral chutes