Spiral chute customer usage site

Spiral chute customer usage site

On site use of spiral chutes by customers. 1. Describe that the beneficiation chute belongs to the inclined flow sorting process. Mortar is provided on a inclined chute or slope. Under the driving force of flowing water, the mineral particle group is not tight and layered. The upper layer of light minerals is quickly discharged from the groove, while the lower layer of minerals with a significant proportion are retained in the groove or discharged from the bottom at low speed. After being distinguished and connected, fine ore dressing or tailings can be obtained. Glass fiber reinforced plastic chutes are machinery for mining and beneficiation, especially ideal for mineral mining and beneficiation on beaches, riverbanks, sandbanks, and river beds. The equipment has the characteristics of suitable structure, simple installation, small footprint, simple operation, stable beneficiation, clear beneficiation, large production capacity, high efficiency, high concentration ratio, high recovery rate, and reliable operation. And it has the advantages of light weight, moisture resistance, rust prevention, corrosion resistance, strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The working principle is the same: the mortar is slowly fed onto the spiral groove surface through a feeding groove installed at the head end of the rotating groove for sorting. The tail of the rotating groove is equipped with a valve type product selection groove, which divides the selection equipment into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each product, the equipment gathering hopper allows the obtained multi head ore flow to be differentiated, merged and exported. The cross section of the spiral concentrator and the slope change of the curve are particularly suitable for the selection of fine particle materials. spiral chute customers use on-site features and advantages. 1. Heavy duty, large production capacity, and today's mineral processing principle requires scale efficiency to create profits. 2. Fine granulation: fine and small particle grade mineral materials, especially minerals with Granularity of -0.047MM, can be treated. The original equipment can basically ensure the recovery of+0.047mm particle size. 3. With the development of Hydraulics, two-phase flow and equipment vibration, spiral chutes have developed from simple use of gravity and flow resistance to the level of composite centrifugal force, mechanical vibration force, magnetic force, etc. By using a composite force field, the enrichment of useful mineral materials and the separation of fine or fine particles can be enhanced, thereby improving the mineral recovery rate. 4. The basic starting point is to save energy, reduce consumption and environmental protection. The land area and space occupied should be small, and the water and electricity consumption should be small. 5. The operation is simple and flexible, the sorting process is stable, the structure is simple, and it is convenient for maintenance management. The spiral chute is used on-site by customers. The fiberglass spiral chute is composed of six parts, including a feeding distributor, a feeding chute, a spiral groove, an equipment cutting groove, a product gathering hopper, and a bracket (including a cross or triangular frame). The rotating groove connected by spiral blades is a key component. The rotating plate is made of fiberglass (fiber reinforced coal gangue) and connected together by bolts. The spiral groove has a pre made wear-resistant layer on the selected surface. He also has the advantage of lightweight, sturdy, and long-lasting consumables. The rotary groove is equipped with a multi tube ore feeding homogenizer to screen minerals, which is easy to control. The mineral separator does not need to be placed on a cross (or tripod) on a support table. The mineral mortar with an average score is slowly fed onto the surface of the rotating groove through a feeding chute installed at the head of the spiral groove for sorting. The bottom of the spiral groove is installed in a valve block type new product cutting groove, and the selected new equipment will be divided into three (or four) types of new products along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the obtained multi-directional mineral flow to be differentiated, gathered, and led out. The transverse plane of the spiral chute and the slope change of the curve are extremely suitable for the sorting of fine-grained materials. 5、 Applicable field: The fiberglass chute is suitable for processing 0.6-0.03mm and vein ore as well as sand ore, but it is unfavorable for sorting when the mud content is high. Nowadays, it has been widely used in the processing of iron ore, tungsten, tin, tantalum niobium ore, coastal and riverside ore sands, gold mines, and so on. Spiral chute customer usage site Spiral chute customer usage site

Spiral chute customer usage site