The function of grooving spiral chutes

The function of grooving spiral chutes

The function of grooving spiral chutes: 1. Introduction: Gravity beneficiation spiral chutes integrate the characteristics of gravity beneficiation spiral chutes, spiral beneficiation machines, shakers, and centrifugal gold concentrators. They have been identified and approved by relevant scientific research, design, universities, or beneficiation enterprises organized by the Ministry of Metallurgical Industry, and are considered to have superior mechanical performance and advanced sorting indicators. They have also won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry. They are now in the field of non-ferrous metals Ferrous is widely used. This machine is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphate rock, tungsten sand, sand tin, tantalum niobium ore, niobium and other non-ferrous metals, rare metals and non colored metal minerals with different specific gravity from fine materials with a Granularity of 0.3-0.02 mm. 2、 Production principle: The spiral chute mineral separator does not need to be restricted from being stacked on the cross (or tripod) of the support table. The evenly proportioned mortar is slowly fed onto the surface of the spiral groove through the feeding groove installed at the end of the rotating groove head for selection. The tail is equipped with a valve type equipment selection tank, which divides the sorted products into three types (or four categories) according to grade along the radial direction. Change the cutting width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that allows for the dense export of the obtained variable mineral flow differentiation. The transverse plane of the fiberglass spiral chute has different slopes, which is very suitable for the separation of fine mineral particles. The third highlight or characteristic of the grooving of the spiral chute is its high efficiency, high recovery rate, and accurate beneficiation; 2. No power required; 3. Lightweight, rust resistant, durable, wear-resistant, and corrosion-resistant; 4. Low cost operation, long service life; 5. Strong adaptability to fluctuation of feed volume, density, Granularity and grade; The friction force on the surface of 6 diamond sand makes the beneficiation efficiency better than other plastic surfaces. The function of grooving the spiral chute is to form a fiberglass spiral chute. The structure consists of six parts: a feeding distributor, a feeding chute, a rotating chute, a product selection chute, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by the connection of spiral plates is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by bolts. The rotating groove has a pre designed durable and wear-resistant layer on the selected surface. She has the advantages of lightweight, solid, and durable use of consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer above it to screen the ore, which is also easy to operate. The concentrator is not limited to being placed on a cross (or tripod) on a support table. The evenly distributed mineral mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the head of the rotating groove, and sorting is carried out. The bottom of the rotating groove is installed in a valve block type new equipment cutting groove, allowing other new products to be selected and classified into three (or four) categories according to grade along the radial direction. Change the acquisition width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric circular tube that converges and leads out the intercepted multi-directional mineral flow. The transverse section of the spiral chute has a slope change, which is particularly suitable for the sorting of fine-grained materials. 5、 Scope of application: FRP spiral chute is suitable for separating fine particles of iron, ferrotitanium, ferrochromium, ferrosulfide, tin, tantalum and niobium, gold, coal, monazite, Rutile, zircon, rare earth and other metal and non-metallic mineral materials with complete Density contrast. The Role of Spiral Chute Grooves The Role of Spiral Chute Grooves

The function of grooving spiral chutes