Laboratory spiral chute

Laboratory spiral chute 1. Introduce the beneficiation chute, including the inclined flow separation process. Mineral mortar is applied to a partially inclined chute or inclined surface. With the assistance of flowing water, the mineral particle group is not tightly fastened and layered. The upper part of the light mineral material quickly flows out of the groove, while the lower part of the heavy mineral material stagnates in the inner groove or slowly flows out from the lower part. After distinguishing and connecting, the concentrate and tailings can be obtained. Spiral chutes are machinery for mining and beneficiation, especially ideal for sand mining in coastal areas, riverbanks, sandbanks, and streams. The product also has the characteristics of reasonable structure, simple installation, small land occupation, simple operation, stable beneficiation, clear screening of ore, large production capacity, high efficiency, high beneficiation enrichment ratio, high recovery probability, and stable operation. It has the advantages of light weight, moisture prevention, rust prevention, strong corrosion resistance, and strong applicability to feed volume and density, Granularity, and grade fluctuation. 2、 The technical principle is that the mineral mortar is slowly fed onto the rotating groove surface through a feeding groove installed at the head of the spiral groove for sorting. The tail of the spiral groove is equipped with a valve type product selection groove, which divides the selection equipment into three categories according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper enables the multi-directional mineral flow to be differentiated and converged. The transverse surface of the fiberglass chute and the slope change of the curve are particularly suitable for the selection of fine particle materials. Laboratory spiral chute 3. Features 1. The sorting process is stable and easy to control 2. The feed density allows a wide range of differences 3. The enrichment ratio is high and the recycling rate is high. 4. The land occupation area is relatively small and the water consumption is small 5. The structure is simple and no power is needed 6. The processing output is large 7. The installation is simple and easy to operate 8. The input is small and the results are quick. Laboratory spiral chute 4. The category is based on the Granularity of the processed ore materials, Chutes can be divided into three types: (1) Coarse grained spiral chutes, with a maximum feed size of 2-3mm or more, and a maximum feed size of 100-200mm. (2) Sand ore chute, handling 2-3MM particle size ore. (3) Slime chute, Granularity of ore feeding is less than 0.074mm. 5、 This equipment is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphorus ethyl, tungsten, sand tin, tantalum niobium, tantalum niobium of fine materials with a particle size of 0.3-0.02mm, and has the specific gravity difference to obtain other non-ferrous metal ores, rare metals and this non-metallic orebody. Laboratory Spiral Chute Laboratory Spiral Chute