How to modify the spiral chute

How to modify the spiral chute

How to modify the spiral chute? Explain that the spiral concentrator summarizes the characteristics of spiral concentrators, spiral concentrators, shakers, and centrifugal gold concentrators. After evaluation by relevant scientific research, design, universities, and beneficiation enterprises organized by the Ministry of Metallurgy, it is believed that this type of mechanical performance is excellent, the sorting indicators are advanced, and it has won the Science and Technology Research Achievement Award of the Ministry of Metallurgy Industry. It has been widely used in non-ferrous and black mining metals. This machine is suitable for separating small materials with Granularity of 0.3-0.02mm to obtain iron, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten ore, cassiterite, tantalum niobium, niobium and other non-ferrous metal ore, rare mineral gold or non-metallic mineral body with gravity difference. 2、 Working principle: The fiberglass chute separator is freely placed on the cross (or tripod) of the support table. Equal mortar is slowly fed onto the surface of the rotating groove through the feeding chute installed at the end of the spiral groove head, and sorting is carried out. The tail end is equipped with a valve block type product acquisition tank, which divides the selected equipment into three types (or four types) according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that allows the selected variable ore flows to converge and export separately. The transverse plane of the fiberglass spiral chute has different slopes, which is very suitable for the separation of fine ore particles. How to Improve the Spiral Chute at ? Highlights and Features: 1. High efficiency, high recycling rate, and correct screening of minerals; 2. No power required; 3. Lightweight, rust resistant, wear-resistant, and not easily corroded; 4. Low cost, long service life; 5. It is applicable to the fluctuation of feed volume, density, Granularity and grade; The friction caused by the appearance of 6 diamond sand makes the beneficiation efficiency better than other plastic surfaces. How to change the spiral chute to 4. The structure of the fiberglass chute consists of six parts: a feeding distributor, a feeding groove, a rotating groove, a product cutting groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by connecting the spiral pieces is the main component. The rotating plate is made of fiberglass (fiber reinforced coal gangue) and is bolted together. The rotating groove has a durable wear-resistant layer made in advance on each side. It has the advantages of light weight, firmness, and durability, which are not easy to damage consumer goods. The head of the spiral groove is equipped with a multi tube feeding homogenizer for ore dressing and averaging, which is easy to control. The sorting machine does not need to be placed on the cross (or tripod) of the support table. The evenly divided mineral mortar is slowly fed to the spiral groove surface through the feeding groove on the rotating groove head for sorting. The tail end of the rotating groove is equipped with a valve block type new equipment selection groove, which will classify the selected new products into three (or four) new products according to grade along the radial direction. To adjust the orientation of the valve block and change the width of each new equipment, it is necessary to cut it off. The new product gathering bucket is a concentric circular tube that allows the obtained multi-directional mineral flow to be densely drawn out. The horizontal plane of the spiral concentrator and the slope change of the curve are extremely suitable for the separation of fine particle ore. 5、 Application: FRP spiral chute is suitable for separating fine iron, ferrotitanium, ferrochrome, ferrosulfur, sand tin, tantalum niobium, placer gold, coal, monazite, Rutile, zircon sand, rare earth and other metal and nonferrous metal minerals with completely sufficient specific gravity difference. How to change the spiral chute? @ @ 000 How to change the spiral chute

How to modify the spiral chute