6s Shaker Spiral Chute

6s shaking table spiral chute 1. Introduce the beneficiation chute, including the inclined flow separation process. Mineral mortar is applied to a partially inclined chute or inclined surface. With the assistance of flowing water, the mineral particle group is not tightly fastened and layered. The upper part of the light mineral material quickly flows out of the groove, while the lower part of the heavy mineral material stagnates in the inner groove or slowly flows out from the lower part. After distinguishing and connecting, the concentrate and tailings can be obtained. Spiral chutes are machinery for mining and beneficiation, especially ideal for sand mining in coastal areas, riverbanks, sandbanks, and streams. The product also has the characteristics of reasonable structure, simple installation, small land occupation, simple operation, stable beneficiation, clear screening of ore, large production capacity, high efficiency, high beneficiation enrichment ratio, high recovery probability, and stable operation. It has the advantages of light weight, moisture prevention, rust prevention, strong corrosion resistance, and strong applicability to feed volume and density, Granularity, and grade fluctuation. 2、 Production principle: The spiral concentrator is freely placed on the cross (or tripod) of the support table. The evenly proportioned mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the head of the rotating groove, and sorting is carried out. The tail end is equipped with a valve block type equipment cutting groove, which divides the sorted products into three (or four) categories according to grade along the radial direction. Change the acquisition width of each product by adjusting the position of the valve block. The equipment gathering bucket is a concentric circular tube that allows the selected variable ore flows to converge and export differently. The cross section and slope of the curve of the fiberglass chute are very suitable for the separation of small particle materials. 6s Shaker Spiral Chute III. Features and Advantages 1. Heavy duty, large production capacity, and today's mineral processing principle requires scale efficiency to create profits. 2. Fine granulation: fine and small particle grade mineral materials, especially minerals with Granularity of -0.047MM, can be treated. The original equipment can basically ensure the recovery of+0.047mm particle size. 3. With the development of Hydraulics, two-phase flow and equipment vibration, spiral chutes have developed from simple use of gravity and flow resistance to the level of composite centrifugal force, mechanical vibration force, magnetic force, etc. By using a composite force field, the enrichment of useful mineral materials and the separation of fine or fine particles can be enhanced, thereby improving the mineral recovery rate. 4. The basic starting point is to save energy, reduce consumption and environmental protection. The land area and space occupied should be small, and the water and electricity consumption should be small. 5. The operation is simple and flexible, the sorting process is stable, the structure is simple, and it is convenient for maintenance management. 6s shaking table spiral chute IV. According to the Granularity of the ore processed, the chute can be divided into three categories: (1) Coarse grained chute. The maximum Granularity of the feed is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) The ore chute is used to handle 2-3mm sized ore materials. (3) Slurry chute, with a feeding particle size less than 0.074MM. 5、 This equipment is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphorus ethyl, tungsten, sand tin, tantalum niobium, tantalum niobium of fine materials with a particle size of 0.3-0.02mm, and has the specific gravity difference to obtain other non-ferrous metal ores, rare metals and this non-metallic orebody. 6s Shaker Spiral Chute 6s Shaker Spiral Chute