Ordinary spiral chute model 1500

Ordinary spiral chute model 1500

The ordinary spiral chute model 1500 is widely used in the beneficiation of metal and non-metallic ores due to its low environmental pollution and low cost. Glass fiber reinforced plastic chute is one of the gravity beneficiation equipment, with a structural feature of a cubic parabolic cross-section. It is suitable for processing finer particle sizes of -0.2mm. In the sorting step, there is no need to add water to wash, and the bottom of the chute is divided into sections to obtain refined, medium, and tailings. 2、 Using a method to set up a spiral concentrator, align it with the vertical line, use an iron frame or wood to fix it in a suitable position, and use a sand pump to transport the ore to the two feeding ports on the spiral head. Add supplementary water, adjust the concentration of the ore slurry, and the ore slurry will naturally swirl from top to bottom. In the flow rate of the inclined plane of the rotation, an inertial centrifugal force will occur, which will cause differences in the gravity, particle size, and shape of the sand ore, Through the influence of the gravity or centrifugal force of the swirling flow, the sand ore is separated, and the selected ore flows into the concentrate hopper and is piped out. The tailings flow into the tailings hopper and are piped to the sand ore pool, and then discharged by a slurry pump, completing the entire beneficiation process. Ordinary spiral chute model 1500 III. Features This machine is suitable for separating fine materials with Granularity of 0.3-0.02mm to obtain iron, ferrotitanium, chromite, pyrite, zircon, Rutile, monazite, phosphate, tungsten ore, sand tin ore, tantalum niobium ore, niobium ore and other non-ferrous metal, rare metal or non-ferrous metal ore bodies with different specific gravity. This machine has advantages such as stable sorting steps, easy control, wide range of allowable changes in ore concentration, high enrichment ratio, high recovery rate, small floor area, small water consumption, simple structure, no need for power, large processing output, easy installation and understanding, easy operation, and quick effectiveness when input is small. The ordinary spiral chute model is 1500. The structure of the spiral concentrator consists of a feeding average device, a cross (tripod), a feeding groove, a spiral groove, a selection groove, a gathering bucket, and a groove pillar. 5、 This equipment is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphoethylene, tungsten, tin ore, tantalum ore, tantalum niobium ore or other nonferrous metals, rare metals and nonferrous metal ore bodies with different density and specific gravity from fine and small materials with Granularity of 0.3-0.02mm. Ordinary spiral chute model 1500 Ordinary spiral chute model 1500

Ordinary spiral chute model 1500