Spiral chute 3D animation

Spiral chute 3D animation 1. Explanation: Gravity separation is widely used in the beneficiation of metal or non-ferrous metal mines due to its low environmental pollution and cost. Spiral chute is one of the gravity beneficiation machinery, with a structural feature that the cross-section presents a cubic parabolic shape, suitable for handling finer particle levels of -0.2mm. During the beneficiation process, there is no need to add water for flushing, and the tail of the chute is divided into sections to select fine, medium, and tailings. 2、 The uniform working principle of the mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the head of the rotating groove, and sorting is carried out. The bottom of the rotating groove is equipped with a valve block type product cutting groove, and the selected equipment is divided into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering hopper allows the selected variable ore flow to be differentiated and converged for export. The cross-section of the spiral chute and the slope of the curve change, which is very suitable for the sorting of small particle materials. Spiral Chute 3D Animation III. Advantages and Features 1. High efficiency, high recovery rate, and correct mineral sorting; 2. No power required; 3. Small weight, rust proof, wear-resistant, and not easily corroded; 4. Low operating cost and long service life; 5. It is applicable to the fluctuation of feed volume, density, Granularity and grade; The friction formed by the surface of 6 diamond sand makes the beneficiation efficiency better than that of other plastic surfaces. Spiral chute 3d animation IV. According to the size of ore processed, the chute can be divided into three categories: (1) coarse spiral chute, the maximum Granularity of ore feeding is more than 2-3MM, and the maximum can reach 100-200mm. (2) The sand ore chute is used to handle 2-3mm sized ore materials. (3) Slurry chute, feeding particle size less than 0.074 millimeters. 5、 Applicable field The spiral concentrator is suitable for separating fine grained iron ore, ferrotitanium ore, chromite ore, pyrite ore, placer tin, tantalum niobium ore, placer gold, coal, monazite ore, Rutile ore, zircon sand, rare earth ore and other metal and nonferrous metal minerals with sufficient density ratio difference. Spiral chute 3D animation Spiral chute 3D animation