Quartz spiral chute

Quartz spiral chute 1. It indicates that the chute separation of minerals includes an inclined flow separation process. The slurry is fed to a inclined chute or slope, and under the push of water flow, the ore particles are loose and layered. The upper layer is so light that the minerals are quickly discharged to the outside of the chute, while the lower part, which is heavier than the main minerals, stagnates in the inner groove or slowly discharges from the lower part. After being obtained, the concentrate and tailings can be obtained. The spiral concentrator is a machine for mining and beneficiation, especially ideal for mineral mining on coasts, riverbanks, sandbanks, and river beds. The product has the characteristics of reasonable structure, simple installation, small footprint, simple operability, stable beneficiation, clear screening of minerals, strong processing capacity, high efficiency, ultra-high enrichment ratio, high recovery rate, and stable operation. There are also advantages such as lightweight, moisture prevention, rust prevention, corrosion prevention, and strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The technical principle is that the mineral mortar is slowly fed onto the rotating groove surface through a feeding groove installed at the head of the spiral groove for sorting. The tail of the spiral groove is equipped with a valve type product selection groove, which divides the selection equipment into three categories according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper enables the multi-directional mineral flow to be differentiated and converged. The transverse surface of the fiberglass chute and the slope change of the curve are particularly suitable for the selection of fine particle materials. Quartz Spiral Chute III. Highlights 1. Stable, easy to control, with a large concentration range. 2. Strong production and processing capacity of mineral materials, high enrichment ratio, and high recovery probability. 3. The area is not occupied much, with low water consumption, simple structure, and no need for power. 4. Installation is simple and easy to operate, with low investment and fast returns. Quartz spiral chutes 4. Structural composition: Spiral chutes are composed of ore feeding homogenizers, crosses (tripods), ore feeding chutes, spiral chutes, intercepting chutes, gathering buckets, and trough pillars. 5、 The use of spiral chutes in the field is suitable for processing 0.6-0.03MM and this vein ore as well as ore sand, but it is unfavorable for sorting when the mud content is high. It has now been widely used in the processing of iron, tungsten, tin ore, niobium tantalum ore, beach and riverbed placer or gold ore, and so on. Quartz spiral chute Quartz spiral chute