What kind of ore is used for spiral chutes

What kind of ore is used for spiral chutes

Spiral chutes are widely used in the beneficiation of metal and non-ferrous metals due to their low pollution and low cost. The fiberglass spiral chute is one of the gravity beneficiation machinery, with a structural feature of a cubic parabolic cross-section. It is used to handle finer particle sizes of -0.2mm, and does not require flushing water in the sorting process. The tail part of the chute is selected in sections to select fine, medium, and tailings. 2、 The working principle is the same: mineral mortar is slowly fed onto the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and selection is carried out. The tail end of the spiral groove is equipped with a valve type product selection groove, which divides the sorting equipment into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering bucket allows the obtained variable mineral flow to be collected and exported. The cross section and slope of the curve of the spiral concentrator are very suitable for the separation of fine particle materials. What kind of mineral is used for the spiral chute? 3. Advantages and characteristics: 1. Stable, easy to control, and a relatively large concentration range. 2. The production and processing yield of materials is large, with high enrichment ratio and high recycling probability. 3. Small footprint, low water consumption, simple construction, and no need for power. 4. Easy to install, easy to operate, minimal investment, and fast recovery of benefits. What kind of ore is used for spiral chute 4. According to the Granularity of ore processed, the chute can be divided into three categories: (1) Coarse grained chute, the maximum Granularity of feeding is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) The ore chute is used to handle 2-3mm sized ore materials. (3) Slurry chute, with a feeding particle size less than 0.074MM. 5、 The spiral concentrator is suitable for separating fine grained iron ore, Ilmenite, Chromite, pyrite, cassiterite, tantalum niobium ore, placer gold ore, coal, monazite ore, Rutile ore, zircon sand, rare earth ore and other metal and non-metallic mineral materials with sufficient density ratio difference. What minerals are used for spiral chutes? What minerals are used for spiral chutes

What kind of ore is used for spiral chutes