Spiral Chute Company

Spiral Chute Company 1. Explanation: Chute selection includes the process of inclined surface flow selection. The slurry is fed to a inclined chute or slope, and under the assistance of water, the mineral particle group is loose and layered. The light minerals in the upper layer are quickly discharged from the groove, while the heavy mineral materials in the lower layer stay in the groove or are discharged from the bottom at low speed. After each is connected, fine beneficiation or tailings can be obtained. Spiral chutes are equipment for mining and beneficiation, especially ideal for sand mining along coasts, rivers, sandbanks, and streams. The product has the characteristics of appropriate structure, easy installation, small footprint, easy operation, stable beneficiation, clear mineral separation, high yield, high efficiency beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of small weight, moisture-proof, rust proof, not easy to corrode, and strong applicability to the fluctuation of feed volume, density, Granularity, and grade. 2、 Use the method to erect the spiral chute, calibrate the vertical line, use an iron frame or wood to set a suitable position, use the mortar pump to send the sand ore to the two feeding ports above the spiral, enter the increased water, adjust the density of the mineral slurry, the mineral mortar naturally swirls from high to low, and a coherent centrifugal force occurs in the flow speed of the whirling inclined surface, and the gravity, Granularity and morphology of the sand ore are different, The efficiency is obtained by the gravity and centrifugal force of the swirling flow, which separates the ore and sand. The selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings are discharged into the tailings hopper and moved to the sand tank through pipelines. Then, they are discharged by a sand pump, completing the entire beneficiation process. Spiral Chute Company III. Advantages and Features: 1. Stable, easy to control, with a large concentration range. 2. Strong material production and processing capabilities, high enrichment ratio, and high recycling rate. 3. Small footprint, low water consumption, simple structure, and no need for power. 4. Easy installation, easy operation, low investment, and fast returns. Spiral Chute Company 4. Structure Composition: Fiberglass spiral chutes are composed of six parts: feeding homogenizer, feeding chute, spiral groove, equipment selection groove, product gathering hopper, and groove bracket (including cross or triangular frame). The rotating groove connected by spiral blades is a key component. The rotating plate is made of fiberglass (fiber reinforced coal gangue), connected together by screws, and the spiral groove has a pre made wear-resistant layer on the selected surface. She has the advantages of being lightweight, sturdy, and durable consumables that are not easily damaged. Above the rotating groove, there is a multi tube feeding homogenizer for ore separation, which is simple and convenient to control. The sieving mineral containers are freely stacked on the cross (or tripod) of the support table. The evenly distributed mortar is slowly fed onto the surface of the rotating groove through the feeding groove installed at the head of the spiral groove, and sorting is carried out. The tail end of the spiral groove is equipped with a valve block type new equipment to obtain the groove. The selected new products are divided into three categories (or four types) according to grade along the radial direction. Change the cutting width of each new equipment by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the selected multiple ore streams to converge and lead out separately. The slope change of the cross-section and curve of the spiral concentrator is very suitable for the separation of fine particle materials. 5、 Use This equipment is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten ore, tin ore, tantalum, tantalum niobium ore and other nonferrous metals, rare mineral metals or nonferrous metal mineral bodies with different specific gravity from fine and small materials with Granularity of 0.3-0.02MM. Spiral Chute Company Spiral Chute Company