Spiral chute PP board accessories

Spiral chute PP board accessories

Spiral chute PP board accessory 1. Describing the chute beneficiation process including inclined surface flow sorting steps. The slurry is fed into a inclined chute or slope, and under the push of water, the mineral particle group is loose and layered. The lighter minerals in the upper layer quickly flow out of the groove, while the minerals in the lower layer with a higher specific gravity stay inside the groove or discharge from the bottom at a low speed. After being extracted, the concentrate and tailings are obtained. The spiral concentrator is an equipment for mining and beneficiation, especially ideal for sand mining in coastal areas, riverbanks, beaches, and streams. The equipment has the characteristics of appropriate structure, simple installation, small land occupation, simple operation, stable beneficiation, clear screening of ore, large output, high efficiency, high enrichment ratio, high recycling rate, and reliable operation. There are also advantages such as small weight, moisture resistance, rust prevention, corrosion resistance, and strong adaptability to fluctuations in ore feed volume or concentration, particle size, and grade. 2、 The application technique is to set up the spiral concentrator, align it with the vertical line, use an iron frame or wood to fix it in a suitable position, and use a sand pump to deliver the ore sand to the two feeding ports on the top of the spiral. This involves supplementing water and adjusting the concentration of mineral slurry. The mineral slurry naturally rotates from high to low, and an inertial centrifugal force appears in the rotating slope flow rate, resulting in differences in density, specific gravity, particle size, and morphology of the sand ore, By obtaining the efficiency of gravity or centrifugal force through swirling flow, the sand and ore are separated, and the concentrate flows into the beneficiation hopper and is piped out. The tail sand enters the tailings hopper and is moved to the sand tank through a pipeline, and then discharged by a mortar pump, completing the entire beneficiation process. Spiral Chute PP Board Accessories III. Highlights and Characteristics 1. Stable, easy to operate, and wide density range. 2. The material processing capacity is large, the enrichment ratio is high, and the probability of recovery is high. 3. Small space occupation, low water consumption, simple structure, and no need for power. 4. Easy installation, easy operation, low investment, and fast efficiency. PP plate accessories of spiral chute IV. According to the particle size of ore materials processed, the chute can be divided into three categories: (1) coarse chute, the maximum Granularity of feeding is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) Sand ore chute, processing 2-3mm Granularity ores. (3) The slurry spiral chute, with a feeding particle size of less than 0.074mm. 5、 The range of spiral chutes used is suitable for separating fine grained iron, ferrotitanium, ferrochrome, pyrite, tin ore, tantalum niobium, gold ore, coal, monazite ore, Rutile ore, zircon, rare earth ore or other metal and non-metallic mineral materials with sufficient specific gravity difference. Spiral chute PP board accessories Spiral chute PP board accessories

Spiral chute PP board accessories