Introduction to Zero Foundations of Spiral Chutes

Introduction to Zero Foundations of Spiral Chutes

Introduction to Zero Basics of Spiral Chutes: Gravity beneficiation is widely used in the beneficiation of metal and non-ferrous metals due to its small environmental pollution and low cost. The fiberglass spiral chute is a type of gravity separation machinery, characterized by a cubic parabolic shape on the cross-section, suitable for handling finer particle levels of -0.2MM. In the selection process, there is no need to add flushing water, and fine, medium, and tailings are segmented at the tail end of the chute. 2、 The mineral mortar with uniform technical principles is slowly fed onto the surface of the rotating groove through the feeding chute installed at the end of the spiral groove head, and then sorted. The bottom of the spiral groove is equipped with a valve block type product selection groove, which divides the selected equipment into three categories according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering bucket allows the obtained variable mineral flow to converge and lead out. The change in slope of the curve on the transverse surface of the fiberglass chute is particularly applicable for the sorting of fine-grained materials. Introduction to the Zero Basis of Spiral Chute III. Features This machine is suitable for separating fine materials with Granularity of 0.3-0.02mm to obtain iron, ferrotitanium, ferrochrome, pyrite, zircon, Rutile, monazite, phosphorus, wolframite, shatin, tantalum niobium, tantalum niobium ore or other colored metal ores, rare mineral metals and non-ferrous metal minerals with gravity differences. This equipment also has advantages such as stable sorting process, easy control, wide range of allowable changes in ore concentration, high enrichment ratio, high recovery probability, small area occupation, low water consumption, simple structure, no need for power, large production capacity, simple installation, convenient operation, low investment, and fast efficiency. Explanation on the zero basis of spiral chute IV. According to the Granularity of ore processed, the chute can be divided into three categories: (1) Coarse grained chute. The maximum Granularity of feeding is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) The ore chute is used to handle 2-3mm sized ore materials. (3) Slurry chute, with a feeding particle size less than 0.074MM. 5、 Scope of application: FRP spiral chute is applicable to the separation of fine grained iron, ferrotitanium, ferrochrome, pyrite, tin ore, tantalum niobium ore, placer gold, coal, monazite, Rutile, zircon ore, rare earth ore and other metals and non-ferrous metal minerals with full density ratio difference. Introduction to Zero Foundation of Spiral Chutes Introduction to Zero Foundation of Spiral Chutes

Introduction to Zero Foundations of Spiral Chutes