Spiral chute made of steel plate

Spiral chute made of steel plate

Steel plate production spiral chute 1. Description: Spiral concentrator summarizes the characteristics of gravity beneficiation spiral chute, fiberglass spiral chute, shaking table, and centrifugal gold concentrator. After relevant scientific research organized by the Ministry of Metallurgy, appraisal by departments such as design, university, and concentrator, it is recognized that this type of equipment has excellent performance, advanced sorting indicators, and has been awarded the Science and Technology Research Achievement Award by the Ministry of Metallurgical Industry. It is now in the field of non-ferrous metals Ferrous is widely used. This machine is applicable to sorting iron ore, ilmenite, chromite, pyrite, zircon sand, Rutile, monazite, phosphorus ethyl, tungsten, cassiterite, tantalum, niobium of 0.3-0.02 mm fine materials, and other non-ferrous metals, rare mineral metals or non-metallic minerals with gravity difference. 2、 The mortar with the same working principle is slowly fed onto the surface of the spiral groove through the feeding chute installed at the end of the rotating groove head, and selected for operation. The tail of the rotating groove is equipped with a valve block type product cutting groove, which divides the sorting equipment into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering hopper enables the selected multi head ore flow to converge and export separately. The cross-section of the spiral chute and the slope of the curve change greatly, which is applied to the selection of fine ore materials. Steel Plate Manufacturing Spiral Chute 3. Characteristics 1. Stable and Easy Control of Sorting Steps 2. Wide Range of Allowing Concentration of Ore Feeding 3. High Enrichment Ratio, High Recovery Rate, 4. Small Area Occupation and Low Water Consumption 5. Simple and Simple Construction, No Power Required 6. Large Production Capacity 7. Simplified Installation and Simple Operation 8. Low Investment and Quick Effectiveness in Steel Plate Manufacturing Spiral Chute 4. Structure of Spiral Concentrator Equipped with Feed Uniformity The cross (tripod), feeding chute, spiral groove, cutting groove, gathering bucket, and groove support are composed. 5、 The spiral chute is suitable for processing 0.6-0.03MM and this vein and sand ore, but it is unfavorable for sorting when the mud content is high. Nowadays, it has been widely used for processing iron ore, tungsten, tin ore, tantalum and niobium, beach and riverside mineral sand and sand gold. Steel plate production spiral chute Steel plate production spiral chute

Spiral chute made of steel plate