1.2 meter spiral chute processing capacity

1.2 meter spiral chute processing capacity

1.2 meter spiral chute processing capacity 1. Explanation: The chute selection includes a slope flow sorting process. When the mortar is fed to a partially inclined chute or slope, with the assistance of water flow, the mineral particle group becomes loose and layered. The upper layer of light mineral materials is quickly discharged from the outside of the groove, while the lower layer of minerals with high specific gravity are retained inside the groove or slowly discharged from the lower part. After being distinguished and connected, concentrate and tailings can be obtained. Fiberglass spiral chutes are equipment for mining and beneficiation, making them particularly ideal for mineral mining along coasts, rivers, beaches, and streams. The equipment has the characteristics of appropriate structure, simple installation, small footprint, simple operation, stable beneficiation, clear screening of minerals, high yield, high efficiency, high beneficiation concentration ratio, high recovery probability, and stable operation. There are also advantages such as small weight, moisture resistance, rust resistance, corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 Production principle: The spiral chute mineral separator does not need to be restricted from being stacked on the cross (or tripod) of the support table. The evenly proportioned mortar is slowly fed onto the surface of the spiral groove through the feeding groove installed at the end of the rotating groove head for selection. The tail is equipped with a valve type equipment selection tank, which divides the sorted products into three types (or four categories) according to grade along the radial direction. Change the cutting width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that allows for the dense export of the obtained variable mineral flow differentiation. The transverse plane of the fiberglass spiral chute has different slopes, which is very suitable for the separation of fine mineral particles. 1.2m spiral chute processing capacity 3. Special features This machine is suitable for separating 0.3-0.02MM fine materials to obtain iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phospho ethite, tungsten ore, sand tin, tantalite, niobium ore and other non-ferrous metals, rare ore metals and non-metallic mineral bodies with gravity differences. This machine also has advantages such as stable selection steps, easy operation, wide range of allowable changes in feed density, high enrichment ratio, high recovery rate, small footprint, low water consumption, simple structure, no need for power, large processing capacity, easy installation, easy operation, low investment, and fast efficiency. The 1.2 meter spiral chute has a processing capacity of . The structure of the fiberglass spiral chute consists of a feeding average device, a cross (tripod), a feeding groove, a rotating groove, a selection groove, a gathering bucket, and a groove pillar. 5、 This machine is suitable for separating iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten ore, placer tin ore, tantalum niobium, niobium ore and other nonferrous metals, rare mineral metals and non nonferrous metal mineral bodies with gravity difference from small materials with Granularity of 0.3-0.02MM. 1.2 meter spiral chute processing capacity 1.2 meter spiral chute processing capacity

1.2 meter spiral chute processing capacity